• Home
• Brands
• Broan Manuals
• Broan Nutone 283003 eclipse
• BROAN Nutone 283003 eclipse Instructions Manual

BROAN Nutone 283003 eclipse Instructions Manual

Download Instructions manual of Broan Nutone 283003 eclipse Ventilation Hood for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

BRUNN uTone

To register this product visit www.broan.com

MODELS 2830 & 2836 ECLIPSE

DOWNDRAFT BLOWER SYSTEM

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer.

Ifyou have questions, contact the manufacturer at the address

or telephone number in the warranty.

2.

3.

4.

Before servicing or cleaning unit, switch power off at service

panel and lock the service disconnecting means to prevent

power from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten a

prominent warning device, such as a tag, to the service panel.

Installation work and electrical wiring must be done by a

qualified person(s) in accordance with all applicable codes

and standards, including fire-rated construction codes and

standards.

Sufficient air is needed for proper combustion and exhausting

of gases through the flue (chimney) of fuel burning equipment

to prevent backdrafting. Follow the heating equipment

manufacturer's guideline and safety standards such as those

published bythe National Fire Protection Association (NFPA),

and the American Society for Heating, Refrigeration and Air

Conditioning Engineers (ASHRAE), and the local code au-

thorities.

5. When cutting or drilling into walt or ceiling, do not damage

electrical wiring and other hidden utilities.

6. Ducted fans must always be vented to the outdoors.

7. Do not use this unit with an additional speed control device.

7. To reduce the risk of fire, use only metal ductwork.

8. Do not install this product with the activating switch directly

behind a burner or element. Minimum distance between the

switch and the edge of the burner should be 4 inches.

9. Loose-fitting or hanging clothing should never be worn when

operating this appliance. They may be ignited by burners/

elements on cooktop.

10.Children should not be left alone or unattended in the area

where this appliance is in use.

11. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Neverleavesurfaceunitsunattendedathighsettings. Boilovers

cause smoking and greasy spillovers that may ignite. Heat oils

slowly on low or medium settings.

2. Always turn hood ON when cooking at high heat or when

cooking flaming foods.

3. Clean ventilating fans frequently. Grease should not be al-

lowed to accumulate on fan or filter.

4. Use proper pan size. Always use cookware appropriate for the

size of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE

EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE

FOLLOWINGa:

WARNING

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet,

or metal tray, then turn off the burner. BE CAREFUL TO

PREVENT BURNS. If the flames do not go out immedi

ately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN - You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels

- a violent steam explosion will result.

4.

Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher, and you

already know how to operate it.

B. The fire is small and contained in the area where it

started.

C. The fire department is being called.

D. You can fight the fire with your back to an exit.

a Based on "Kitchen Firesafety Tips" published by NFPA.

CAUTION

1. For general ventilating use only. Do not use to exhaust

hazardous or explosive materials and vapors.

2. To avoid motor bearing damage and noisy and/or unbalanced

impellers, keep drywall spray, construction dust, etc. off power

unit.

3.

4.

5.

6.

Clean filters and grease-laden surfaces frequently.

Do not repair or replace any part of this appliance unless

specifically recommended in this manual. All other servicing

should be done by a qualified technician.

Please read specification label on product for further informa-

tion and requirements.

To reduce the risk of fire and electric shock, install the

downdraft only with Broan Exterior Blower Models 331H or

332H or Broan In-Line Blower Models HLB3, HLB6, HLB9, or

HLB111. Other blowers cannot be substituted. (Blowers sold

separately.)

PLANNING

This downdraft blower system is

designed to be used to exhaust TYPICAL INSTALLATION

airbornecontaminantswhen cook- COUNTER CHtMNEYTOP

This system can beeasily installed

following these basic steps:

• Cut out the countertop

opening.

• Mount the unit in the

cabinet.

AIR

VENT

ing with a variety of gas or electric mo.P COOKTOP I

cooktops. It can be mounted in "--L..,,_,

island, peninsula, or conventional

wall locations.

L

• Install exterior or in-line blower J_\

3-1/4" x 10" I20 VAC

• Connect the ductwork DUCTCONNECTOR GROUNDED

and electrical. OUTLET

• Install the cooktop.

INSTALLER" Save this manual for Electrical Inspector and Homeowner to use.

HOMEOWNER: Use and Care Information on Page 4.