Ford 2000 Crown Victoria Workshop Manual
Download Workshop manual of Ford 2000 Crown Victoria Automobile for Free or View it Online on All-Guides.com.
Brand: Ford
Category: Automobile
Type: Workshop manual
Model: Ford 2000 Crown Victoria , Ford 2000 Grand Marquis
Pages: 17
Instrument Panel
Removal
CAUTION: Electronic modules are sensitive to static electrical charges. Avoid exposing any modules to static electrical charges, as this may cause damage to the
modules.
1. Remove the driver side air bag module. For additional information, refer to Section 501-20B.
2. Remove the passenger side air bag module. For additional information, refer to Section 501-20B.
3. Close the glove compartment.
4. Position the speed control servo aside.
1. Disconnect the electrical connector.
2. Remove the nuts.
3. Position the speed control servo aside.
5. Disconnect the LH engine compartment in-line electrical connector.
Release the wiring harness locators.
6. Disconnect the brake fluid sensor electrical connector.
7. Disconnect the windshield wiper motor electrical connector.
Release the wiring harness locators.
8. Disconnect the LH engine compartment in-line electrical connectors.
SECTION 501-12: Instrument Panel and Console 2000 Crown Victoria/Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 06/21/1999
Page
1
of
17
2000 Crown Victoria/Grand Marquis Workshop Manual
8/20/2011
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYA/~MUS~LEN/20/
...