Ford Expedition 1999 Workshop Manual
Download Workshop manual of Ford Expedition 1999 Automobile for Free or View it Online on All-Guides.com.
1
2
3
4
Transfer Case—4R70W Transmission
Removal
1. With the vehicle in NEUTRAL, raise and support the vehicle.
2. NOTE: Drain the transfer case if disassembly is required.
Remove the drain plug and drain the transfer case.
3. Remove the skid plate, if equipped.
4. NOTE: To maintain initial driveshaft balance, index-mark the rear driveshaft.
Remove the rear driveshaft. For additional information, refer to Section 205-01.
5. Remove the two nuts and the front driveshaft shield.
6. NOTE: To maintain initial driveshaft balance, index-mark the front driveshaft.
Remove the front driveshaft. For additional information, refer to Section 205-01.
7. Make preliminary adjustment references.
1. Index-mark the torsion bars to the torsion bar crossmember.
2. Measure and record the torsion bar adjuster bolt length.
SECTION 308-07B: Transfer Case — Automatic Shift 1999 Expedition/Navigator Workshop Manual
REMOVAL
Procedure revision date: 02/07/2002
Special Tool(s)
Remover/Installer, Torsion Bar
204-185 (T95T-5310-AR)
Adapter for 204-185
204-203 (T96T-5310-A)
Shift Linkage Remover/Replacer
307-017 (T67P-7341-A)
Page 1 of 41999 Expedition/Navigator Workshop Manual
8/14/2010http://www.fordtechservice.dealerconnection.com/pubs/con...