Dell SonicWall SRA 4200 Administrator's Manual
Download Administrator's manual of Dell 4200 Desktop, Gateway for Free or View it Online on All-Guides.com. This version of Dell 4200 Manual compatible with such list of devices, as: 4200, SonicWall SRA 4200, SonicWall SRA 1200, SonicWall SRA 1600, SonicWall SRA 4600
Brand: Dell
Category: Desktop , Gateway , Network Hardware , Server
Type: Administrator's manual
Model: Dell 4200 , Dell SonicWall SRA 4200 , Dell SonicWall SRA 1200 , Dell SonicWall SRA 1600 , Dell SonicWall SRA 4600
Pages: 440
Command Line Interface | 419
If a field is not filled out, the prior value is retained, allowing you to change only a single
field. After each field has been prompted, the new network settings are shown and a
confirmation message is given for the user to review and verify the changes before applying
them. The following shows the result when you save the changes:
Would you like to save these changes (y/n)? y
Saving changes...please wait....
Changes saved!
Press <Enter> to continue...
After saving the changes, press Enter to return to the original display of the System
Information and Network Settings and verify that the changes have taken effect:
System Information
Model: SRA 4200
Serial Number: 0017C54172D4
Version: SonicOS SSL-VPN 5.5.0.0-11sv
CPU (Utilization): l.8 GHz Via C7 Processor (2%)
Total Memory: 2 GB RAM, 1 GB Flash
System Time: 2011/08/18 13:39:51
Up Time: 0 Days 00:40:51
X0 IP Address: 192.168.200.201
X0 Subnet mask: 255.255.0.0
Default Gateway: 192.168.200.1
Primary DNS: 10.50.128.52
Secondary DNS: 4.2.2.2
Hostname: SRA4200
Main Menu
1. Setup Wizard
2. Reboot
3. Restart SSL-VPN Services
4. Logout
Press <Ctrl-c> at any time to cancel changes and logout.
Select a number (1-4):
If no changes are saved, the following message is displayed and pressing Enter returns to
the initial display of the System Information and Network Settings:
No changes have been made.
Press <Enter> to continue...
Note When applying settings that change the IP address, there may be a delay of up to 5
seconds as the interface settings are updated.
2. Reboot – Selecting this option displays a confirmation prompt and then reboots:
Reboot
Are you sure you want to reboot (y/n)?
3.
Restart SSL-VPN Services – This option displays a confirmation prompt and then restarts
the Web server and the related SRA daemon services. This command is equivalent to
issuing the EasyAccessCtrl restart command.
Restart SSL-VPN Services
Are you sure you want to restart the SSL-VPN services (y/n)? y