Dell SonicWall SRA 4200 Administrator's Manual
Download Administrator's manual of Dell 4200 Desktop, Gateway for Free or View it Online on All-Guides.com. This version of Dell 4200 Manual compatible with such list of devices, as: 4200, SonicWall SRA 4200, SonicWall SRA 1200, SonicWall SRA 1600, SonicWall SRA 4600
Brand: Dell
Category: Desktop , Gateway , Network Hardware , Server
Type: Administrator's manual
Model: Dell 4200 , Dell SonicWall SRA 4200 , Dell SonicWall SRA 1200 , Dell SonicWall SRA 1600 , Dell SonicWall SRA 4600
Pages: 440
System Configuration | 97
NTP Settings
The NTP Settings section allows the administrator to set an update interval (in seconds), an
NTP server, and two additional (optional) NTP servers.
Setting the Time
To configure the time and date settings, navigate to the System > Time page. The appliance
uses the time and date settings to timestamp log events and for other internal purposes. It is
imperative that the system time be set accurately for optimal performance and proper
registration.
Note
For optimal performance, the SRA appliance must have the correct time and date
configured.
To configure the time and date settings, perform the following steps:
Step 1 Select your time zone in the Time Zone drop-down list.
Step 2 The current time, in 24-hour time format, will appear in the Time (hh:mm:ss) field and the
current date will appear in the Date (mm:dd:yyyy) field.
Step 3 Alternately, you can manually enter the current time in the Time (hh:mm:ss) field and the
current date in the Date (mm:dd:yyyy) field.
Note If the check box next to Automatically synchronize with an NTP server is
selected, you will not be able to manually enter the time and date. To manually enter
the time and date, clear the check box.
Step 4 Click Accept to update the configuration.
Enabling Network Time Protocol
If you enable Network Time Protocol (NTP), then the NTP time settings will override the
manually configured time settings. The NTP time settings will be determined by the NTP server
and the time zone that is selected in the Time Zone drop-down list.
To set the time and date for the appliance using the Network Time Protocol (NTP), perform the
following steps: