Dell OptiPlex 9020M Owner's Manual
Download Owner's manual of Dell OptiPlex HUB Antenna, Computer Hardware for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Antenna , Computer Hardware , Desktop
Type: Owner's manual
Model: Dell OptiPlex HUB , Dell OptiPlex 9020M
Pages: 55
Installing the HDMI or DisplayPort Connector Board
1. Place the HDMI or DisplayPort connector board into its slot.
2. Tighten the screws to secure the HDMI or DisplayPort connector board to the base panel.
3. Connect the cable to the HDMI or DisplayPort connector board.
4. Install the cover.
5. Follow the procedures in After Working Inside Your Computer.
Removing the PS2 and Serial Connector Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Perform the following steps as shown in the illustration:
a. Disconnect the cable from the PS2 and serial connector board [1].
b. Remove the screws that secure the PS2 and serial connector board to the base panel [2].
c. Slide and lift the PS2 and serial connector board away from the computer [3].
29