Dell W2600 Owner's Manual
Download Owner's manual of Dell W2600 LCD TV, Monitor for Free or View it Online on All-Guides.com.
Troubleshooting Your TV 37
Picture is too dim or too bright
Update the color settings in the OSD. Press
Menu
on the
remote control and select
Picture
.
The screen is not centered correctly 1
Update the size settings in the OSD. Press
Menu
on
the remote control and select
Size
.
2
Reset the original factory defaults. Press
Menu
on the
remote control, select
Setup
, and then select
Factory
Reset
.
Screen has one or more lines 1
Check the aspect ratio settings in the OSD. Press the
Menu
button on the remote control and select
Size
.
For more information on using the OSD, see "Using
the On-Screen Display" on page 25.
2
Ensure the proper source is selected in the
Input
Select
menu. See "Input Select Menu" on page 26 for
more information.
3
Try connecting a different device. Ensure that you
properly connect the cables and update the input
source in the OSD.
4
Update the size settings in the OSD. Press
Menu
on
the remote control and select
Size
.
5
Reset the original factory defaults. Press
Menu
on the
remote control, select
Setup
, and then select
Factory
Reset
.
The side panel buttons do not work Check the OSD to see if the buttons have been locked.
Press Menu on your remote control, select Setup.
If you are unable to use the remote control, press the
volume up and the channel up buttons on the side of
the TV for 10 seconds to unlock the buttons.
The picture is too small
1
Adjust the size settings. Press
Menu
on the remote
control, and select
Size
.
2
This may be a problem with your device. See the
documentation for the device.
Problem Possible Solution
W2600a00.book Page 37 Friday, August 6, 2004 2:52 PM