Viking E-35-IP Product Manual
Download Product manual of Viking E-35-IP Intercom System for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
The E-35-IP VoIP Entry Phone is designed to provide quick
and reliable handsfree communication for SIP VoIP phone
systems with PoE. The E-35-IP Entry Phone can be pro-
grammed from any Touch Tone phone or PC on the same
LAN. The Entry phone can dial up to 5 programmable num-
bers and provide color analog CCTV video of who is at your
door or gate.
The E-35-IP Entry Phone will flash the “Call” LED during di-
aling and automatically light the LED when the call is an-
swered. All programming parameters, including phone
numbers and location numbers, are stored in non-volatile
memory, requiring no batteries. The unit is PoE powered.
For outdoor installations where the unit is exposed to precipitation or condensation, the E-35-IP Entry Phones are available
with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets and boots, sealed connections, gel-
filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD# 859.
PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
E-35-IP/EWP
VoIP Entry Phones with
Analog Color Video Camera
September 21, 2015
VIKING
Features
Applications
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
VoIP Entry Phones with
Built-In Analog Color Video Camera
• Built-In high resolution analog NTSC color video camera with wide viewing angle,
tilt/swivel adjustments and wide operating temperature
• Self diagnostic reports via email (testing com, mic, speaker & switch)
• Automatic polling and programming software included
• 2 Amp relay contacts for door/gate or SL-2 strobe light control
• Blue “Call” LED indicator
• SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
• PoE powered (class 1, <4 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environ-
ments
• VoIP eliminates the need for “Push to Talk” mode
• Network downloadable firmware
• T-10 Torx security screws for added security
• Handsfree operation
• Marine grade 316 stainless steel prevents corrosion
• Laser Etched graphics on stainless steel models
• Programmable to dial up to 5 numbers on busy or ring no answer
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet
IP66 Ingress Protection Rating, see DOD# 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range (-40°F to 140°F)
• Replacement board available
• Volume adjustments for microphone and speaker
• E-35-IP is flush mountable using the included rough-in box or can be surface mounted
using an optional VE-5x5 Surface Mount Box (DOD# 424)
• Optional PB-100 Polling System available (DOD# 232)
• Optional SL-2 or BLK-4-EWP strobe light kit available (DOD# 242/653)
Power: PoE class 1 (<4 watts)
Dimensions: Overall-127mm x 127mm x 57mm (5” x 5” x 2.25”),
Plastic Electrical Box-102mm x 102mm x 54mm (4” x 4” x 2.12”)
Shipping Weight: 0.9 Kg (2 lbs)
Operating Temperature: -40° C to 60° C (-40°F to 140°F)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261,
100BASE-TX with auto cross over
Connections: (1) RJ45 10/100 Base-T, (6) gel-filled butt connec-
tors (3M Scotchlok UR2)
(See page 3 for camera specifications)
Installation requires the assistance of a Network Administrator / IT Technician.
!
• Gate Entrance
• Parking ramps/lots
• ATM machines
• Medical centers
• Lobbies
• Entryways
• Stadiums
• Convention centers
• Public access areas
Standard
Flush Mount
Shown in Optional
VE-5x5 Surface Mount Box