Installation, Operation and Maintenance Manual
QT
TM
Cube Max
TM
Models:
QTCBMX-1S-1M, QTCBMX-2S-1M,
QTCBMX-3S-1M, QTCBMX-4S-1M,
QTCBMX-1L-1M, QTCBMX-2L-1M,
QTCBMX-3L-1M, QTCBMX-4L-1M,
QTCBMX-5L-1M, QTCBMX-1L-.5M,
QTCBMX-2L-.5M, QTCBMX-3L-.5M
IOM-HS-QTCubeMax
Table of Contents
System Specications .................................2
Replacement Filters ...................................2
Notice to Installers ....................................2
Installation Precautions ................................3
Operation ..........................................3
Installation ..........................................3
Maintenance ........................................3
Filter Cartridge Replacement Procedure ...................3
Replacement Parts List ................................4
System Drawings ....................................4
Limited Warranty .....................................8
QTCBMX-4L-1M
Tested and certified by WQA against NSF/ANSI Standard
42 for the reduction of claims specified on the performance
data sheet & NSF/ANSI 372 for "lead free" compliance.
Cube Max Models QTCBMX-1L-.5M, QTCBMX-2L-.5M
and QTCBMX-3L-.5M are tested and certified by WQA
against NSF/ANSI Standard 42 for Material Safety and
Structural Integrity, and NSF/ANSI Standard 372 for "lead
free" compliance.
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
You are required to consult the local building and plumbing
codes prior to installation. If the information in this manual
is not consistent with local building or plumbing codes,
the local codes should be followed. Inquire with governing
authorities for additional local requirements.
WARNING
!
WARNING
!
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system.
WARNING
!
