Yealink W52P Quick Reference Manual
Download Quick reference manual of Yealink W52P Cordless Telephone, Handsets for Free or View it Online on All-Guides.com.
Brand: Yealink
Category: Cordless Telephone , Handsets , IP Phone , Telephone
Type: Quick reference manual
Model: Yealink W52P , Yealink W52H
Pages: 2
1
2
If there is only a call on hold, press the sof t key.
Press the sof t key during a call, and select .
If there are two calls on hold, press the sof t key to resume the current call,
press the sof t key to swap between the two calls.
For more information, refer to the User guide available online at:
.
Copyright 2014 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
You can transfer a call in the following ways:
1. Press the sof t key during a call, and select .
1. Press the sof t key during a call, and select .
1. Press the sof t key during a call, and select .
2. Enter the number you want to transfer the call to.
3. Press
Incoming calls are for warded immediately.
Incoming calls are for warded when the handset is busy.
Incoming calls are for warded if not answered after a period of time.
1. Press the k ey to enter the main menu, and select ->.
3. Press or to highlight the desired forwarding type, and press the sof t key.
5. Enter the number you want to forward the incoming calls to in the field.
7. Press thesof t key to accept the change.
2. Enter the number you want to transfer the call to.
4. Press the sof t key when you hear the ring-back tone.
3. Press the sof t key.
2. Enter the number you want to transfer the call to.
3. Press
4. Press the sof t key after the call is answered.
2. Press or to highlight the desired line, and press the sof t key.
4. Select from the field.
6. Press or to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the field.
Press during a call to mute the call.
Press again to un-mute the call.
www.yealink.com
Applies to firmware version 40.15 or later.
or the key to dial out.
or the key to dial out.