Yoo 2 User Manual
Download Operation & user’s manual of Yoo YOO2 Pedometer for Free or View it Online on All-Guides.com.
1
2
% to Goal LEDs activated
STEP 1: Activate YOO®2
YOO2 is in SNOOZE MODE.
To activate:
Your YOO2 is now almost ready to
use!
Welcome to YOO!
YOO2 is a Bluetooth
Smart enabled Activity
Tracker that records
every step you take
during the day and
syncs with your smart
phone where you can
view other stats like
distance traveled,
calories-burned, minutes
actively moving and
points earned in the
YOO Challenge.
Let’s Get Moving!
YOO2
User Guide
YOO™ is a trademark of YOO Fitness, LLC. All rights
Reserved. ©2014. All other trademarks are the property of
their respective owners.
U.S and International patents pending.
Product ID: YX3600
STEP 3: Download YOO® App
1. You’ll need to download the YOO
App next.
2. Go to the App Store or Google
Play and download it for Free.
3. Follow the on-screen instruc-
tions to set up your YOO Account
and pair your YOO2 to your smart
phone.
Important: To view a
listing of compatible smart
phones, go to:
www.YooChallenge.com/compatibility
STEP 4: Sync YOO®2 to Phone
1. Make sure your phone has
Bluetooth turned “ON”.
2. Follow the App instructions to
set up an account and sync your
YOO2.
3. To update and view your stats,
launch the YOO App and then
press the front, center buon on
your YOO2.
4. YOO2 just flashes 3 LED in the
middle while syncing is in progress.
The syncing result will be shown on
the app.
Important: Your YOO2
communicates with your
phone through Bluetooth
Smart.
To conserve baery power,
your YOO2 will only auto-sync
with the YOO App every 15 minutes.
To update your stats instantly,
launch the YOO app and press the
YOO2 front, center buon.
STEP 5: YOO®2 Lights
Your YOO2 uses LED lights to track
your progress towards your daily
step goal. As you get closer to
your daily goal more LED’s will light
up when you press the front,
center buon. Once you hit your
goal all 5 LED’s will light up.
0% - 24%
1 LED activated
25% - 49%
2 LEDs activated
50% - 74%
3 LEDs activated
75% - 99%
4 LEDs activated
100%
5 LEDs activated
a
a
b
b
3
1
4
STEP 5: Using your YOO®2
1. YOO2 Tracks your daily step
count and keeps tabs on the total
amount of time you are actively
moving.
2. Use the YOO App to view your
daily steps, distance-traveled,
calories-burned and active
minutes.
3. Press the front, center buon on
your YOO2 while the APP is open
to update your stats instantly.
Side note: Your YOO2
will reset to 0 Steps at
12:00 AM every day. This
will not erase the data
stored in memory on your
YOO2.
Important: : YOO2 uses
LED lights to
communicate progress
towards your goal. Your
step goal is pre-set to
10,000/day but you can track
to dierent stats on the app. The
key to the YOO Challenge is
earning Points for the NEW YOO
and there are lots of ways to do
that in addition to recording steps.
Start using the YOO App or go to:
www.YOOChallenge.com
to find out how!
STEP 2: Aach YOO®2 Clip
1. Slip YOO2 into its clip which is
included in your packaging.
2. YOO2 can also be used without
the clip if you prefer to store in a
pocket or bra or sock.
Important: For beer
accuracy be sure YOO2 is
tightly secured to you and
not swinging or bouncing in
a pocket.
Press and Hold the front,
center buon for
5 seconds.
All 5 LED’s will flash.
Lights will
race back and forth !!!
®
3 lit LEDs
means YOO2
is syncing.