• Home
• Brands
• York International Manuals
• York International RAC13J18
• York International RAC13J18 Technical Manual

York International RAC13J18 Technical Manual

Download Technical manual of York International RAC13J18 Heat Pump for Free or View it Online on All-Guides.com. This version of York International RAC13J18 Manual compatible with such list of devices, as: RAC13J18, RAC13J24, RAC13J36, RAC13J42, RAC13J60

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

RAC SERIES

SPLIT-SYSTEM AIR CONDITIONERS

13 SEER – R-410A – 1 PHASE

1.5 THRU 5 NOMINAL TONS

MODELS: RAC13J18 THRU 60

Due to continuous product improvement, specifications are

subject to change without notice.

Visit us on the web at

www.upgnet.com

Additional rating information can be found at:

www.ahridirectory.org

WARRANTY SUMMARY*

Standard 5-Years limited parts warranty.

Standard 5-Years limited compressor warranty.

Extended 10-Years limited parts and compressor warranty

when product is registered online within 90 days of purchase

for replacement or closing for new home construction.

*Does not apply to R-22 models, 3-Phase models, or internet sales.

See Limited Warranty certificate in User's Information Manual for details.

®

TECHNICAL

GUIDE

TECHNICAL

GUIDE

810767-UTG-A-0313

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 13 SEER Series unit is the outdoor part of a versatile cli-

mate system. It is designed with a matching indoor coil compo-

nent from Johnson Controls Unitary Products. Available for

typical applications this climate system is supported with acces-

sories and documents to serve specific functions.

FEATURES

• Small Footprint - Extremely lightweight with a compact foot-

print, it is a perfect fit for any application.

• Quality Condenser Coils - The coil is constructed of alumi-

num microchannel tubing and enhanced aluminum fins for

reduced size and increased efficiency.

• Coil Protection - Coils are protected from damage by a slot-

ted, stamped steel coil guard and secondary polymer mesh.

• Optional Factory E-Coat - Available ElectroFin

®

coated coil

on select models.

• Protected Compressor - Compressors are protected inter-

nally by a high pressure relief valve and a temperature sen-

sor, and externally by the system high pressure switch. A

factory installed liquid line filter-drier further protects the

compressor against moisture and debris.

• Environmentally Friendly Refrigerant - The next genera-

tion refrigerant R-410A delivers environmentally friendly per-

formance with zero ozone depletion.

• Durable Finish - An automotive quality finish provides the

ultimate protection from harmful UV rays and rust-creep,

ensuring a long-lasting, high quality apprearance. A powder

paint top coat is applied over a baked on primer using a gal-

vanized, zinc coated steel base material.

• Lower Installed Cost - Installation time and costs are

reduced by easy power and control wiring connections. The

unit is factory charged for a 15-foot lineset. The small base

dimension means less space is required on the ground or

roof.

• Top Discharge - Warm air from the top mounted fan is

blown up, away fro0m the structure and any landscaping.

This allows compact location on multi-unit applications.

• Low Operating Sound Levels - The upward air flow carries

the normal operating noise away from the living area. The

rigid top panel effectively isolates any motor sound. Isolator

mounted compressor and the condenser coil muffle the nor-

mal fan motor and compressor operating sounds.

• Low Maintenance - Long life, permanently lubricated motor-

bearings need no annual servicing.

• Easy Service Access - Fully exposed refrigerant connec-

tions and a single panel covering the electrical controls make

for easy servicing of the unit.

• Secured Service Valves - Secured, re-usable service

valves are provided on both the liquid and vapor sweat con-

nections for ease of evacuating and charging.

• Agency Listed - Safety certified by CSA to UL 1995 / CSA

22.2. Performance certified to ANSI/AHRI Standard 210/240

in accordance with the Unitary Small Equipment certification

program.