Valentine One Cheetah Manual

Download Manual  of Valentine One Cheetah Radar Detector for Free or View it Online on All-Guides.com.

Valentine One Cheetah Manual  - Page 1
1
Valentine One Cheetah Manual  - Page 2
2
Thank you for purchasing the Cheetah Radar Detector Inter-
face for your Valentine One.
Cheetah invented the concept of using GPS speed to sup-
press false alarms on other manufacturers’ radar detectors.
This product will wirelessly link your V1 with your Cheetah
GPS camera detector, making them work as one complete,
integrated system to enhance the V1 with voice alerts and
false alarm suppression. Make sure you read the section on
“Setting up your Cheetah” to get the most out of your set up.
Enjoy your new “quieter” detector. I know you’re going to love
the way they work together.
Drive safely,
Al Smith, Director, Cheetah Advanced Technologies Ltd
1 x RADARnode wireless transmitter
1 x RDI software card for the V1 (inserted in RADARnode)
1 x Cheetah connector cable for the V1
1 x User manual
THIS INTERFACE IS COMPATIBLE WITH
Warranty Registration
Register online at www.SpeedCheetah.com
Limited Warranty
Cheetah Advanced Technologies Ltd. warrant our products
against all defects in materials and workmanship for a period
of one year from the date of the original purchase. Full
warranty terms and conditions available online at:
www.SpeedCheetah.com
Service & Support
If for any reason your Cheetah product develops a fault,
please check our Customer Service page on:
USA & Canada - visit www.GPSdetector.com
Europe & Rest of World - visit www.SpeedCheetah.com
If any problems persist, or to arrange a product return, please
Cheetah Advanced Technologies Ltd. declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
© 2009 Cheetah Advanced Technologies Ltd, Scotland. All rights reserved.
RDI Software card
Detector socket
Power socket
VizAlert Test button
(motorcycles only)
Over-ride cable for
Cheetah LASERnode
(motorcycles only)
The RADARnode is a wireless transmitter (433 Mhz) that
connects up to your radar detector’s power supply socket.
When your radar detector gives an alert, the RADARnode
digitally analyzes the alert data and instantly transmits a radio
code to your Cheetah GPS detector, which immediately gives
you the V1 alert using Cheetah voice and tones.