ADC Below Ground HDSLx 8-Slot Repeater Housing Radiator II Specification Sheet

Download Specification sheet of ADC Below Ground HDSLx 8-Slot Repeater Housing Radiator II Switch for Free or View it Online on All-Guides.com.

ADC Below Ground HDSLx 8-Slot Repeater Housing Radiator II Specification sheet - Page 1
1
ADC Below Ground HDSLx 8-Slot Repeater Housing Radiator II Specification sheet - Page 2
2
www.adc.com +1-952-938-8080 1-800-366-3891
SPEC SHEET
Radiator
®
II
Below Ground HDSLx 8-Slot Repeater Housing
ADCs latest addition to its family of outside
plant products, the Radiator
®
II Below Ground
HDSLx Repeater Housing, is a highly cost-
effective outside plant enclosure for local
loop electronics. With its advanced thermal
management capabilities, the Radiator II
extends the life of enclosed cards or repeaters
and reduces costly truck rolls and maintenance.
Radial placement of card slots permits efficient
and predictable thermal transfer for uniform
cooling. In addition, its unique design allows
the heat to radiate externally, increasing the
reliability of the enclosed electronics.
Designed for manhole applications, the
Radiator II below ground housing can be
mounted horizontally which requires 50
percent less space, doubling the number of
housings and quadrupling circuit density. When
mounted vertically, the integrated tilt bracket
greatly reduces the amount of clearance
required. When deployed, the enclosure
provides mounting for up to 8 single wide or
2 double wide 239-style HDSL, HDSL4, T1,
ISDN, or DDS repeaters. Up to 6 double wide
239-style repeaters may be accommodated
with an optional upgrade kit (catalog number
(RAD-DWKIT).
Benefits
Radial placement of card slot improves •
thermodynamic performance for maximum
reliability and repeater plug life
Flexible, high-density design supports •
8 single or 2 (6 with RAD-DWKIT) double
wide HDSL, HDSL4, G.SHDSL, T1, ISDN
and DDS repeaters
Easier installation with smaller footprint •
and up to 30 percent less weight than
other 8-slot repeater housings and many
4-slot housings
Up to 44 percent less weight than Radiator •
II 16-slot repeater when the extra capacity
is not required
Improved corrosion protection with domed •
lid and added test access card retainer
Primary protection is integrated into •
card slot connector easing replacement
and reducing line stub length for better
performance and protection
Improved cable strain relief reduces potential •
cable damage during installation
Cable stub uses traditional color code for •
easier and quicker installation
Repeaters and lightning protection are easily •
accessible from the lid
Build-in test card retainer for included test •
access card