Alcatel-Lucent OAW-1200BGE Quick Installation Manual
Download Quick installation manual of Alcatel-Lucent OAW-1200ABGE Wireless Access Point for Free or View it Online on All-Guides.com.
Brand: Alcatel-Lucent
Category: Wireless Access Point
Type: Quick installation manual
Model: Alcatel-Lucent OAW-1200ABGE , Alcatel-Lucent OAW-1200ABGR , Alcatel-Lucent OAW-1200BGE
Pages: 27
Download Alcatel-Lucent OAW-1200ABGE Quick installation manual
3/16/04 © 2004 All Rights Reserved.
90-100832-000 Rev 5
External-Antenna OmniAccess AP Quick Installation Guide
External-Antenna Alcate l OmniAccess Wirele ss Access Point Quick Instal lation Guide
System Release 2.0
This Guide contains several sections allowing you to install an OAW-1200BGE or OAW-1200ABGE
Alcatel OmniAccess Wireless Access Point or an OAW-1200ABGR Alcatel OmniAccess Remote Edge
Access Point (OmniAccess AP 1200R). These models contain internal 802.11a and 802.11b/g antennas
and connectors for optional external 802.11a and 802.11b/g antennas.
If you are installing an OAW-1200BG or OAW-1200ABG Alcatel OmniAccess Wireless Access Point with
internal 802.11a and 802.11b/g antennas and no connectors for optional external antennas, please
refer to the Internal-Antenna Alcatel OmniAccess Wireless Access Point Quick Installation Guide
.
• Overview
• Step 1: Collecting Required Tools and Supplies
• Step 2: Configuring the OmniAccess AP or OmniAccess AP 1200R Before Installation
• Step 3: Preparing Mounting Locations
• Step 4: Mounting the OmniAccess APs
• Step 5: Returning MAC Information
• Planning Notes
• FCC Statements for OmniAccess APs
ATTENTION!Special Considerati ons
While Alcatel OmniAccess Wireless Access Points have been engineered for easy installation, there are
some guidelines that are very important to the end users:
• PLACE Alcatel OmniAccess Wireless Access Points NO MORE THAN 140 FEET APART FROM EACH
OTHER. Placing OmniAccess APs further apart almost always results in poor coverage.
• DO NOT MOUNT OmniAccess APs OUTSIDE BUILDINGS.
• DO NOT MOUNT OmniAccess APs ON BUILDING PERIMETER WALLS UNLESS THE OPERATOR
WANTS TO PROVIDE COVERAGE OUTSIDE THE BUILDING.
• MAKE SURE THAT THE Alcatel OmniAccess Wireless Access
Points ARE INSTALLED VERTICALLY. Alcatel OmniAccess
Wireless Access Points ARE DESIGNED TO BE INSTALLED
VERTICALLY, hanging from a ceiling, to create the largest
coverage area per OmniAccess AP. Hanging the OmniAccess AP
from the ceiling provides the best RF coverage.