AMX MVP-WDS-9 Installation Manual
Download Installation manual of AMX MVP-WDS-9 Docking Station for Free or View it Online on All-Guides.com.
1
2
Installation Guide
MVP-WDS-9 Wall/Flush Docking Station
Overview
While charging the MVP-9000i, the Power-over-Ethernet MVP-WDS-9 Wall/
Flush Mount Docking Station provides fast, reliable wired Ethernet
communication to the touch panel. In addition, the MVP-WDS-9 employs a
unique, anti-theft locking mechanism to keep the touch panel safe and secure.
With a push of a button, the panel glides forward for simple removal and
transport. The Wall/Flush Docking Station is available in either white (FG5967-
13) or black (FG5967-12).
The features of the MVP-WDS-9 include:
• Full charging of a docked MVP-9000i in approximately 5 hours
• Touch panel password feature for security
• Integrated docking alignment guides for easy docking
Specifications
The MVP-9000i touch panel remains locked in the MVP-WDS-9 until unlocked
by the user. This may be done by pressing the Security Release button and
then entering an appropriate password (please refer to the MVP-9000i
Operation/Reference Guide, available from www.amx.com, for more
information). The station ejects the MVP-9000i device top first (FIG. 2). The
device uses two neodymium rare-earth magnets to secure the MVP-9000i to the
cradle when the touch panel is angled forward.
Unlocking the Touch Panel
Once placed within the Wall Docking Station, the MVP-9000i remains secured
until the user unlocks it. To release the touch panel from the Wall Docking
Station:
1. Press the Security Release button.
2. A password keypad will pop up on the MVP-9000i screen. Enter a
password in the password keypad and press Enter.
3. Wait for the Wall Docking Station to pivot the touch panel away from the
wall.
4. The device will remain in the ejected position until the MVP-9000i is
removed. Wait until the device’s ejection door has completely withdrawn
before re-installing the MVP-9000i.
Recharging
To recharge the MVP-9000i:
1. Slide the device into the Wall Docking Station cradle bottom-first and make
sure the device is fully seated in the Docking Station.
2. Press the top of the MVP-9000i back until it clicks. The touch panel is now
locked into the Docking Station, and the station will automatically charge
the device’s battery.
3. To release the touch panel, press the Security Release button, enter the
password (if activated), and wait for the Wall Docking Station to pivot the
touch panel away from the wall.
FIG. 1 MVP-WDS-9-GB Wall Docking Station - Front
MVP-WDS-9 Specifications
Dimensions (HWD): • 9.75" x 12.50" x 2.13" (24.77cm x 31.75cm x
5.40cm)
Note: Always use the cutout/installation
dimensions for the MVP-WDS-9 when installing
this unit into various surfaces. This SP engineering
drawing is available online at www.amx.com.
Power Requirements: • 30 W (Class II listed power supplemented),
supplied via the PS-POE-AT High-Power PoE
Injector.
Startup Power
Requirements:
• Cradle and panel (not charging): 16 W
• Cradle and panel (charging): 23 W
• Ejection: 23 W
Weight: • Without back box: 1.50 lbs (0.68 kg)
• With back box: 2.40 lbs (1.09 kg)
Front Panel Components: • Securing Magnets: Secures MVP touch panel
during ejection.
• Security Latch: Adds the primary layer of security
when mounting an MVP touch panel. When the
device is inserted, this latch grabs onto the rear of
the touch panel and secures it to prevent it from
inadvertently being removed.
• Interface Connector: A set of contacts that connect
to the underside MVP connector strip. This
connection provides both communication and
power between the touch panel and the
MVP-WDS-9.
• Support Cradle: This retractable mechanism
supports a resting MVP panel and allows a user to
either insert or remove a connected MVP panel.
• Security Release pushbutton: Located on the front
of the unit, this pushbutton toggles an on-screen
security keypad if security is enabled.
- Entering the correct release code allows the
MVP-WDS-9 to release the touch panel from the
security latch.
Security Release
MVP-9000i-GB
MVP-WDS-9
button
MVP-WDS-9 Specifications (Cont.)
Operating/Storage
Environments:
• Operating Temperature: 0° C to 40° C
(32° F to 104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C to 60° C
(-4° F to 140° F)
• Storage Humidity: 5% - 85% RH
Included Accessories • MVP-WDS-9 Wall Docking Station Installation
Guide (93-5967-12)
• Snap-On Ferrite (04-0007)
• MVP-WDS-9 Wall Docking Station Template
(68-5967-01)
• PS-POE-AT High Power PoE Injector (FG423-81)
Other AMX Equipment: • MVP-9000i-GB Modero Wireless Touch Panel,
Black (FG5967-01)
• MVP-9000i-GW Modero Wireless Touch Panel,
White (FG5967-02)
• MVP-TDS-9-GB Black Table Docking Station
(FG5967-10)
• MVP-TDS-9-GW White Table Docking Station
(FG5967-11)
• CB-MVP-WDS9 Rough-In Box (FG038-13)
FIG. 2
MVP-WDS-9-GB Wall Docking Station - Side View
MVP-9000i
Wall Docking Station
Security Release button