• Home
• Brands
• Canon Manuals
• Canon imagePROGRAF TX-2000
• Canon imagePROGRAF TX-2000 Introductory Information

Canon imagePROGRAF TX-2000 Introductory Information

Download Introductory information of Canon imagePROGRAF TX-2000 All in One Printer, Printer for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1

QT6-2184-V01 PRINTED IN XXXXXXXXXXXXXXXX © CANON INC. 2017

479

It is recommended that you reserve space of the following dimensions to allow you to work around the printer.

Check the completed image of the printer you purchased and make sure you have enough space to install the printer.

In order to ensure that this product is used safely, be sure to read the precautions.

-> Quick Guide (separate manual)

Before Setting Up the Printer

Read this manual before attempting to operate the printer.

Keep this manual in a handy location for future reference.

Set up the printer using the following procedure.

• Windows is a trademark or registered trademark of Microsoft Corporation in the

U.S. and/or other countries.

TX-2000

Installation space (W x D x H)

• When not using the stand

59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm)

• When using the stand

59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm)

TX-3000

Installation space (W x D x H)

70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm)

TX-4000

Installation space (W x D x H)

78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)

Conrming the Installation Space

Overview of Setup

Important

• The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the

options are used.

• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the

position in the illustration.

Caution

• Instructions in this Setup Guide show the TX-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic

operations are the same.

RMC (Regulatory Model Code): K10475

RMC (Regulatory Model Code): K10474

RMC (Regulatory Model Code): K10473

If an error message appears during setup or other problems occur,

refer to "Responding to Messages" on p.14.

Setup Guide

Introductory Information

ENGLISH

• Check this also after setup is complete.

3.9 inches

(100 mm)

(When not using

the stand)

3.9 inches (100 mm)

(When using the

stand)

23.6 inches

(600 mm)

(When using the stand)

(When not

using the stand)

5.9 inches (150 mm)

7.9 inches

(200 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm)

7.9 inches

(200 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm)

3.9 inches

(100 mm)

5.9 inches

(150 mm)

7.9 inches

(200 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm)

3.9 inches

(100 mm)

5.9 inches

(150 mm)

*

Assemble the Stand

(P. 3)

* Refer to the separate

manual

Attach the Alignment Rod

(P. 3)

Install the Printer

(P. 3)

*

Attach the Roll Unit

(P. 5)

* Refer to the separate

manual

*

Attach the Basket

(P. 5)

* Refer to the separate

manual

*

Assemble the Stacker

(P. 5)

* Refer to the separate

manual

Turn On the Printer

(P. 5)

Install the Ink Tanks

(P.7)

Install the Print Head

(P. 9)

Load the Paper

(P.10)

Storage Locations

(P.13)

How to Display the Online Manuals

(P.14)

• Perform Print Head Adjustment

and Select the Connection Method

(P.11 ~ 12)

• Connect to the Printer