Chaney 50308 Instruction Manual

Download Instruction manual of Chaney 50308 Clock for Free or View it Online on All-Guides.com.

Brand: Chaney

Category: Clock

Type: Instruction manual for Chaney 50308

Pages: 2

Download Chaney 50308 Instruction manual

Chaney 50308 Instruction manual - Page 1
1
Chaney 50308 Instruction manual - Page 2
2
1 • Clock Setup
INST - 50308 011211
Instruction Manual
Package Contents:
(1) Atomic Wall Clock
(1) Instruction Manual
What you need:
(1) AA Battery
Atomic Wall Clock
#50308
Thank You for purchasing this CHANEY
®
product. Please read this manual in its entirety
to fully enjoy the benefits and features of this product. Please keep this manual for future
reference.
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and
workmanship and to be free of defects if properly installed and operated for a period of one year from date of
purchase. REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT
OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty
contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option,
be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned goods shall
be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and
charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures
which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed,
damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL
DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF HTIS WARRANT. SOME
STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS ALL
LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY
ACCEPTANCE OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY
FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION
IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS
PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE
THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND
SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmfuly interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the equipment.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
Chaney Customer Care
877-221-1252
Mon-Fri 8:00 a.m. to 4:30 p.m. CST
www.chaneyinstrument.com
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST)
www.chaneyinstrument.com
-4-
-1-
1. SET MINUTE AND HOUR HANDS TO THE NEAREST HOUR
Set the clock to the nearest hour (If it is 2:45, set the clock to 3:00. If it is 3:20, set
the clock to 3:00). The clock can be set in either direction, but the last 15 minutes
of adjustment to the minute hand should be done in a clockwise direction. This will
minimize gear play.
2. PRESS RED BUTTON TO IDENTIFY HAND POSITION
Insert one “AA” Alkaline battery and wait a couple of seconds (about 3-5 seconds). Then
quickly press the red button 4 to 5 times. This tells the microprocessor that the minute
hand is at the 12 and turns on the receiver.
3. SETUP IS NOW COMPLETE
After the above setting process has been completed, the clock will begin to seek out
the time signal broadcasted. Once the time signal has been received by the clock the
minute hand will advance (8 times speed) or slow (1/5 speed) down as necessary, until
the clock sets itself to the correct time.
NOTE: After the setting process has been completed, the clock should start to beep.
The beeping will automatically stop in 20 to 30 seconds. Pressing the red
button again will activate the beeper for another 20 to 30 seconds.
About the Atomic clock
A clock is considered atomic if it has an accuracy of one second in a million years.
Consumer clocks are considered atomic if they attain this accuracy by receiving a signal
from an atomic clock. In North America, the National Institute of Standards and
Technologies operates an atomic clock in Colorado which transmits the time codes via
the radio station WWVB. The signal is transmitted in a very low frequency (60,000 Hz). The
Chaney clock you have purchased includes a built-in receiver which picks up the signal
from the WWVB station. For the best possible reception, place the main unit with the back
side facing Colorado. NOTE: Due to solar radiation in the atmosphere, the atomic clock
signal is weaker during the day. Most synchronization with the WWVB atomic clock signal
happens at night when there is less interference.