GE GUD27ESSM Dimensions And Installation Information
Download Dimensions and installation information of GE 27GSSM Dryer for Free or View it Online on All-Guides.com.
Brand: GE
Category: Dryer
Type: Dimensions and installation information
Model: GE 27GSSM , GE GUD27ESSM
Pages: 4
1
2
3
4
Listed by
Underwriters
Laboratories
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
GUD27ESSM/27GSSM
GE
®
Unitized Spacemaker
®
3.8 DOE Cu. Ft. Stainless Steel Washer and 5.9 Cu. Ft. Dryer
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Specification Revised 11/17
ELECTRICAL REQUIREMENTS:
GUD27ESSM Electric Dryer – This appliance should be connected to an
individual, properly-grounded branch circuit with 120/240V or 120/208V
single-phase 60 Hz electrical service and should be protected by
30-amp time-delay fuses or circuit breakers KW Rating per voltage
(240/208). This appliance is manufactured with neutral connected to
the frame. Power cord should be purchased separately.
GAS REQUIREMENTS:
GUD27GSSM Gas Dryer – This appliance should be connected to an
individual branch circuit with 120-volt single-phase 60 Hz electrical
service and should be protected by 20-amp time-day fuses or circuit
breakers. This appliance is equipped with a 4-foot long flexible U.S.
listed 20-amp power cord to match a 20-amp receptacle.
NOTE: Gas Rated input 20,000 BTU/HR. Factory equipped for natural
gas. Tested for LP gas. LP gas supply requires a conversion kit. Have a
qualified gas technician install a conversion kit before use.
Dryers must be exhausted to the outside.
INSTALLATION INFORMATION: For complete information, see
installation instructions packed with the product.
Installation Instructions
* Dimension represents door closed including handle and knobs.
NOTE: With feet set at mid position, feet can be adjusted +/- 3/8".
27" NOMINAL PRODUCT DIMENSIONS
Vent
Drain outlet
51°
Gas Inlet
Water Inlets
*26-1/8"
34-3/8"4-3/8"
3"
47 1/2"
18-5/8"
12-1/2"
75-7/8"
53-1/4"
3-7/8"
36-7/8"
30-7/8"
26-3/4"
22-1/4"
3"