Cisco Aironet 600 Series Configuration Manual
Download Configuration manual of Cisco Aironet 600 Series Network Router, Wireless Access Point for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Network Router , Wireless Access Point
Type: Configuration manual for Cisco Aironet 600 Series
Pages: 4
1
2
3
4
CHAPTER
3-1
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
OL-29882-03
3
Configuring the Access Point
This chapter provides the following information:
• Configuring the Wireless LAN Controller IP Address on the Access Point, page 3-1
• Configuring Radio Channels on the Access Point, page 3-2
• Configuring Personal Wireless LANs, page 3-3
• Troubleshooting, page 3-4
Configuring the Wireless LAN Controller IP Address on the
Access Point
Follow these steps to configure the IP address of the Wireless LAN Controller on your Cisco Aironet
600 Series OfficeExtend access point.
Step 1 Obtain the IP address of your Wireless LAN controller from your company’s IT professional.
Step 2 Access the 600 Series OfficeExtend access point GUI as described in “Accessing the GUI” section on
page 2-1.
Step 3 Click the Configuration tab.
The Configuration page is displayed.
Step 4 From the Configuration page, click the WA N tab.
The WAN page is displayed.
Step 5 Enter the IP address of the primary controller in the Controller IP Address field.
Step 6 Leave the Static IP check box unchecked to allow the WAN IP address to be assigned by DHCP.
Step 7 Click Apply to commit your changes.
A verification screen is displayed.
Step 8 Click Continue.
The 600 Series OfficeExtend Access point will connect to the controller and download the current
software image. Allow the device 5 minutes to download and reboot with the new code and
configuration.