Lawmate CM-BU18 Quick Manual

Download Manual  of Lawmate CM-BU18 Security Camera for Free or View it Online on All-Guides.com.

Brand: Lawmate

Category: Security Camera

Type: Manual  for Lawmate CM-BU18

Pages: 1

Download Lawmate CM-BU18 Manual 

Lawmate CM-BU18 Manual  - Page 1
1
(1) (3)(2)
V1.0
1. Name and Parts
2. Package Content
1
2
3
4
1. CMOS Lens
2. Microphone
3. AV Jack
4. NTSC/PAL Switch
4. Camera Setup Illustration
Connection with AV Out cable:
If you do not use LawMate portable DVR and would like to connect
CM-BU18 to your own DVR or display device, you could use AV Out
cable to make the connection.
1. Install the device as illustration shown below.
2. Connect yellow and red cables to your DVR or display.
3. Connect 9V power-cord to your power supply.
*If you do not have the power supply, you can use our battery holder
to supply the power. Slide the back cover of battery holder to open
the battery tray. Insert a PP3 (9V) battery into battery tray.
Switch to ON position.
4. Captured images are automatically shown on the connected
DVR or display.
9V Battery Holder
Switching Cable
DVR/Display
Optional Accessories
Portable Transmitter
- TB-1255/2455
5. Connection with Wireless Equipment
1. Camera can also be connected with RF wireless equipment.
2. Connect AV jack to portable transmitter.
3. Connect DVR or any recording device with portable receiver.
4. Set transmitter and receiver at the same frequency or channel.
5. Turn on receiver’s power.
6. Captured images will be shown on receiver side.
7. Note that receiver should be connected with external
LCD / TV in order to display captured images.
CM-BU18
CMOS Button Camera
Quick Guide
(5)(4)
3. Select Video Signal System
1. NTSC / PAL switch is on the back of the camera.
2. Make sure the video system is selected before
turning on the DVR.
Connection with a portable DVR:
1. Select NTSC or PAL on the camera.
2. Plug in the camera into CAM IN socket on the DVR.
3. Power on DVR and press REC button to start recording.
Optional Accessories
LawMate Portable DVR
Unscrew from mount and
screw onto center piece
NOTE:
Camera is not originally screwed with covert button head in the package.
Remember to screw covert button head before use.
9V Battery Holder
AV Cable
Button Screw Kit
MADE IN TAIWAN
PAL NTSC
MADE IN TAIWAN
PAL NTSC
PAL NTSC
LawMate, innovation never stops
®