• Home
• Brands
• Leica Manuals
• Leica TPS 300
• Leica TPS 300 Quick Manual

Leica TPS 300 Quick Manual

Download Manual  of Leica TPS 300 Measuring Instruments for Free or View it Online on All-Guides.com. This version of Leica TPS 300 Manual compatible with such list of devices, as: TPS 300, TPS 400, TPS 700, TPS 800

1

2

Leica UK Quick Guides

Coding and formats on your TPS 800 Series Total Station

Most of this guide will be relevant for the TPS300, 400 and 700 series also but some functions may vary slightly.

Step Action Screen Display

1

Coding – you can enter coding on the instrument

either using a pre-defined codelist or just enter the

code manually.

To use a pre-defined codelist, you will need to use

Leica Geo Office (LGO) to create the codes, or upload

an existing codelist.

Basic codes can be created on-board the instrument

by going to MENU, F4-File Management, F4-Codes.

Use the Codelist Manager function in LGO to create

your codes.

Codes can either be of type Point or Free. Point codes

are thermatical and are recorded with the

measurement. Free codes are separate to the

measurements and are recorded on their own in-

between measurements. Free codes can be used with

certain surveying software.

To enter point coding on the instrument if you do not

have a codelist, highlight Code on the standard

SURVEYING screen and type in a code. This will then

store with your measurement.

To be able to select a pre-defined code from the

codelist, either select F4-↓ twice until F2-CODE

appears, or configure the USER Key = CODE from

MENU, F2-Settings. The USER key can then be used

for code entry.

A codelist file has the extension .crf and can be loaded

onto the instrument – see additional guide Using Data

Exchange Manager. One codelist at a time can be

transferred to the Code folder on the instrument.

Example codelists can be found on the included CD.