MuxLab 500040 Quick Installation Manual

Download Quick installation manual of MuxLab 500040 Extender for Free or View it Online on All-Guides.com. This version of MuxLab 500040 Manual compatible with such list of devices, as: 500040, 500041, 500042, 500043

Brand: MuxLab

Category: Extender

Type: Quick installation manual

Model: MuxLab 500040 , MuxLab 500041 , MuxLab 500042 , MuxLab 500043

Pages: 2

Download MuxLab 500040 Quick installation manual

MuxLab 500040 Quick installation manual - Page 1
1
MuxLab 500040 Quick installation manual - Page 2
2
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
© MuxLab Inc. 94-000606-C SE-000579-C
Specifications
Environment
VGA. VESA VP&D 1.0, VIP ver 2.0
Devices
CRT/LCD monitors, plasma, laptops, PCs, projectors.
Transmission
Transparent to the user
Bandwidth
DC to 60 MHz
Input Signals
Video: 1.1 Vp-p
H &V sync: TTL standard. 300 kHz max. bandwidth
Insertion Loss
Less than 3 dB per pair over the frequency range
Common Mode Rejection
Ratio (CMRR)
15 kHz -60 dB typ.
100 kHz to 10 MHz -40 dB typ.
200 MHz -20 dB typ.
Return Loss
-15 dB max from DC to 60 MHz
Connectors
500040/500042: DB15 HD Plug, RJ45 Shielded
500041/500043: DB15 HD Receptacle, RJ45 Shielded
Max. Distance via
Cat 5E/6 UTP/STP Cable
VGA: 640x480 pixels (15 MHz) 450 ft (137 m)
SVGA: 800x600 pixels (30 MHz) 350 ft (107 m)
XGA: 1024x768 pixels (60 MHz) 250 ft (76 m)
SXGA: 1280x1024 pixels (100 MHz) 200 ft (61 m)
WXGA: 1366x768 pixels 180 ft (55 m)
RJ45 Pin Configuration
EIA 568 A or B
Reverse Polarity Sensitive
Pin 1(R) Pin 2(T) Balanced – Red
Pin 4(R) Pin 5(T) Balanced – Green
Pin 7(R) Pin 8(T) Unbalanced – Blue (7 sig, 8 gnd)
Pin 3(R) Pin 6(T) Unbalanced – H & V Sync
Compatibility
Not compatible with the VGA Balun (500010, 500011,
500014) or Active VGA Balun Kit (500035. 500036)
Reset button
May be needed when used with certain display devices
Grounding screw
Grounding screw for optional use
Cable
Cat 5E/6 or better unshielded twisted pair (UTP)
Impedance
Input: RGB 75 ohms Output: RGB 100 ohms
Temperature
Operating: 0° to 55°C
Storage: -20° to 85°C Humidity: Up to 95% non-condensing
Enclosure
ABS fire retardant plastic
Dimensions
2.40” x 2.25 x 1.00” (6.10 x 5.72 x 2.54 cm) plus 6” (15 cm)
lead on 500040 and 500042.
Weight
500041/500043: 2.34 oz (66 g)
500040/500042: 3.87 oz (110 g)
Mounting
Free-standing. Separate velcro mounting pad included
Warranty
Lifetime
Order Information
500040 VGA Balun II, DB15 HD Plug, PC Side
500041 VGA Balun II, DB15 HD Receptacle, Monitor Side
500042 VGA Balun II, DB15 HD Plug, Monitor Side
500043 VGA Balun II, DB15 HD Receptacle, PC Side
VGA Balun II
500040, 500041, 500042, 500043
Quick Installation Guide
Overview
The VGA Balun II eliminates costly and bulky VGA cable, allowing a VGA source to
be connected to a VGA monitor via one 4-pair Cat 5E/6 unshielded twisted pair (UTP)
cable. Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350 ft
(107 m) via a Cat 5E/6 UTP cable at 800x600 resolution. Each VGA connection
requires a VGA Balun II at the source (500040, 500043) and a VGA Balun II (500041
or 500042) at the display.
NOTES
The VGA Balun II does not support VGA handshaking and control signals. Therefore
it is necessary to set the monitor attributes prior to installing the VGA Baluns. In order
to do this, first connect the standard VGA cable directly from the PC to the monitor
and then set the monitor attributes to the required settings (i.e., resolution, color, etc.).
Also, in order to achieve optimum results via twisted pair, set the Contrast and
Brightness levels to maximum.
The shield on the RJ45 connector is provided as an option for use in harsh electrical
environments where shielded twisted pair cable (STP) may provide additional noise
immunity. When using STP, ensure that the shield on both sides is grounded.