Robustel R2000 Dual Hardware Installation Manual

Download Hardware installation manual of Robustel GoRugged R2000 Network Router for Free or View it Online on All-Guides.com.

Robustel GoRugged R2000 Hardware installation manual - Page 1
1
Robustel GoRugged R2000 Hardware installation manual - Page 2
2
Robustel GoRugged R2000 Hardware installation manual - Page 3
3
Hardware Installation Quick Guide
R2000 Dual--
Dual Module Industrial Cellular VPN Router
Package List
Before installing the R2000 Dual router, verify the kit contents as following:
Robustel R2000 Dual router
Power terminal block
Document and software CD
Optional Accessories
AC/DC power supply adapter, POE power supply adapter
35mm DIN rail mounting kit or wall mounting kit
SMA cellular antenna (HSPA+/LTE)
RP-SMA Wi-Fi antenna (stubby or magnetic)
Notify your sales representative if any of the above items is missing or damaged.
Reset Button
Reboot: Press the button for at least 2~7 seconds under the operating status.
Restore to factory default settings: Wait for 5 seconds after powering up the router; press the RST button
by a small non-conductive stick with a blunt end until all twelve LEDs blinking one by one; and release the
button within 5 seconds; then the router will be restored to factory default settings.
Ethernet Port
R2000 Dual router has five Ethernet ports, Eth0 is WAN port and Eth1~Eth4 are LAN ports. Four LAN port
support POE function. Every Ethernet port has two LED indicators, and each indicator has three states.
The yellow one is Link Indicator and the green one doesnt mean anything. For details see the table
below:
Indicator
State
Description
Link Indicator
On
Connection is working
On, blinking
Data is being transmitted
Off
Connection is not working
Environment Requirements
Power input: 9 to 48 VDC
Power consumption: 100 mA @ 12 V in idle state;
800 mA (peak) @ 12 V in communication state
Operating temperature: -40 to +70°C
Relative humidity: 5 to 95% RH
Device should be in accordance with
the reliable grounding to avoid
lighting strike.
Use the rated power adapter for the
device, and note the power polarity
when wiring.
Pay attention to waterproof in
storage, transporting and operating
environment.
Place the device on the horizontal
surface.
Damaging the products warranty
labeling cannot enjoy the free
maintenance in warranty period.
Hardware Introduction
Overview