• Home
• Brands
• Philips Manuals
• Philips LTC 5104/50
• Philips LTC 5104/60 Manual

Philips LTC 5104/60 Manual

Download Manual  of Philips LTC 5104/50 Switch for Free or View it Online on All-Guides.com. This version of Philips LTC 5104/50 Manual compatible with such list of devices, as: LTC 5104/50, LTC 5104/60, LTC 5108/50, LTC 5108/60

1

2

3

4

The LTC 5104 Series and LTC 5108

Series are automatic sequential video

switchers. The LTC 5104 Series have

4-camera inputs and 1-monitor output;

the LTC 5108 Series have 8-camera

inputs and 2-monitor outputs. All

models are microprocessor-based.

The auto-terminating BNC connectors

eliminate the need for the user to

select a 75-ohm terminated video

input or a high impedance

(unterminated video input with looping

video output. The switcher sets itself

correctly for either situation. The

looping video output allows another

piece of equipment to be connected

to the same video line.

Features include a 16-Character

Camera Titler, Nonvolatile Memory

Back-Up, On-Screen Status Line,

On-Screen Configuration Menus in

English, French, German, and Spanish

(11 for the LTC 5104 Series and

12for the LTC5108 Series), and a

SMART Setup. The Status Line displays

the present camera number, the

operation status, and camera title.

There are five (5) operation status

notations: S -- skipped camera

displayed, RUN -- sequence running,

MA -- monitor armed, ALARM -- alarm

closure call-up, and HOLD -- camera

held. The Configuration Menus include

Dwell Adjust, Operating Mode

(LTC5108 Series only), Alarm Reset

Mode, Alarm Capture, Capture Time,

Alarm Dwell Time, Alarm Contacts

Option, Status Line, Brightness and

Background of titles, Display Position,

System Reset, and Camera Titler. The

VideoSearch™ feature detects any

camera inputs without video and sets

them to be skipped.

These versatile switchers provide

individually or globally adjustable

camera dwell times from 1 to 64

seconds. Automatic camera callup can

be activated by motion detectors or

remote alarm closures. Alarm contact

can be selected either normally-open

or normally-closed. Alarms override

normal operating mode to home on

alerted camera. Vertical interval

switching gives roll-free viewing. An

alarm output is provided to activate a

VCR to record alarms. The minimum

time that an alarm will be held once

triggered (unless cleared or the alarm

input is disabled) can be set to 1 to 63

seconds. Sequencing through multiple

alarms can be set to occur at a dwell

of 1 to 64 seconds.

Two modes of operation can be

selected for the LTC5108 Series

switchers. The two modes only affect

Monitor B; Monitor A continuously

sequences regardless of mode. In the

Sequencing Mode, Monitor B will show

either an alarm call up of a camera, a

camera under a HOLD condition or

normal sequencing of cameras. In the

Blanking Mode, Monitor B will show

either an alarm call-up of a camera, a

camera under a HOLD condition or a

blank screen.

LTC 5104 Series, LTC 5108 Series

4- and 8-Position Premium

SequentialSwitchers

nn Microprocessor-Based

nn On-Screen Status Line &

Setup Menus

nn 16 Character Camera

Titles

nn Programmable Dwell

Times & Alarm

Dwell/Capture Time

nn Automatic Termination

nn Foreign Language

On-Screen Menus

Available