Powerwerx SS-30DV User Manual

Download Operation & user’s manual of Powerwerx SPS-30DM Power Supply for Free or View it Online on All-Guides.com.

Brand: Powerwerx

Category: Power Supply

Type: Operation & user’s manual

Model: Powerwerx SPS-30DM , Powerwerx SS-30DV

Pages: 2

Download Powerwerx SPS-30DM Operation & user’s manual

Powerwerx SPS-30DM Operation & user’s manual - Page 1
1
Powerwerx SPS-30DM Operation & user’s manual - Page 2
2
Thank you for purchasing a compact Powerwerx Switching
Power Supply, designed to supply 25 Amps connuous and
30 Amps peak output at 14.1 VDC. Two models are available:
SS-30DV with front mounted Powerpole connectors and SPS-
30DM which includes front mounted volt & amp digital meters
with adjustable voltage output.
SS-30DV Features
Front Connecon: 2 Powerpole connectors
Rear Connecon: 1/4 inch binding posts that also accept
banana plugs or compression connecons
Illuminated Power Switch
SPS-30DM Features
Dual Metered Digital (Amps/Volts) Power Supply
User Selectable variable output voltage from 5~16 VDC by
adjusng the front mounted knob or xed output at 14.1
VDC
Rear Connecon: 1/4 inch binding posts that also accept
banana plugs or compression connecons
Specicaons
Electrical specicaons:
Input Range: 100-130 VAC or 200-240 VAC, 50/60Hz (User
switchable)
Output Voltage: SS-30DV 14.1 VDC xed, SPS-30DM
variable 5~16 VDC
Output Amperage: 25 Amps connuous (30 Amp peak)
Polarity Ground: Negave
Internal Protecon: Thermal, over current
Internal Input Fuse: 6.3 Amps at 115 VAC
Ripple Peak-to-Peak Max. <100mVpp
Noise Peak-to-Peak Max. <100mVpp
Operang temperature rang: 0 ~ 50 °C
Storage temperature: -20 ~ 85 °C
Physical dimensions and materials:
Weight: SS-30DM - 3.0 lbs., SPS-30DM – 4.0 lbs.
Overall Dimensions: 6.1 x 5 x 2.5 in (154mm long, 127mm
wide, 63mm tall)
Fan: Quiet internal cooling fan
Machined metal case front bezel
Input Voltage Selecon
The power supply is set up for 230V AC input as shipped from
the factory. For 115V AC applicaons, set the recessed 115/230
input select switch located on the rear of the power supply
into the proper posion. Posions are idened on the switch.
Use a small screwdriver to slide the switch into posion. No
adjustment is necessary for either 50 or 60 Hz input.
SS-30DV & SPS-30DM ▪ Rev 4/2015
SS-30DV & SPS-30DM User Manual
23695 Via Del Rio, Yorba Linda, CA 92887 ▪ 714-674-0073 Phone ▪ 714-674-4949 Fax
Installaon Instrucons
1. Unplug the power supply from the mains supply outlet.
2. Select the correct input voltage (See Input Voltage
Selecon).
3. Connect the power cable’s posive (red) wire to the
posive terminal and connect the negave (black) wire to
the negave terminal on the back of the power supply.
4. Plug the AC power cable into the power socket on the back
of the radio.
5. Plug the power supply into the main AC wall outlet.
Turning the Power Supply ON / OFF
Turn the power supply ON by pressing the power switch to the
‘ON’ Posion.
Before you turn the power supply OFF, turn the radio o as
described in the user documentaon for the radio. Then turn
the power supply o by pressing the power switch to the ’OFF’
Posion.
Cooling
The SS-30DV power supply is cooled by convecon and
forced air cooling (normal airow around the power supply
in combinaon with a temperature controlled fan to improve
cooling at higher levels of use). The fan is temperature acvated
and the speed is controlled by a sensor. When the temperature
rises, the fan speed increases.
Cercaons
Meets FCC CFR Title 47 Part 15 Subpart B: Class B, CISPR:
2005 ANSI C63.4: 2003
Meets CE/LVD (Low-Voltage Direcve 2006/95/EC)
standard
Meets EMC: EN 55022:206+A1: 2007, 2010, EN 61000-3-
2:2006
Package Contents
Power Supply
AC Power Cord, 4 .
SS-30DV SPS-30DM