SCS 963E Installation, Operation And Maintenance Manual

Download Installation, operation and maintenance manual of SCS 963E Air Cleaner, Air Ionizer for Free or View it Online on All-Guides.com.

Brand: SCS

Category: Air Cleaner , Air Ionizer

Type: Installation, operation and maintenance manual

Model: SCS 963E , SCS 963E-EURO , SCS 963E-X

Pages: 3

Download SCS 963E Installation, operation and maintenance manual

SCS 963E Installation, operation and maintenance manual - Page 1
1
SCS 963E Installation, operation and maintenance manual - Page 2
2
SCS 963E Installation, operation and maintenance manual - Page 3
3
TB-9007 Page 1 of 3
© 2017 DESCO INDUSTRIES, INC.
Employee Owned
SCS - 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website: StaticControl.com
963E Benchtop Air Ionizer
Installation, Operation and Maintenance
Description
The SCS 963E Benchtop Air Ionizer is a self-contained
ionizing air blower designed to remove static charges
from non-conductive objects. The proprietary circuitry
contained in the blower generates balanced levels of
positive and negative ions. The ionizer is equipped
with a two speed fan which allows the user to select
the amount of ionized air to be delivered to the target
object. The Benchtop Air Ionizer meets the required
limits of ANSI/ESD S20.20 tested per ANSI/ESD
STM3.1 or ESD TR53.
The Benchtop Air Ionizer reduces a static charge
of ± 1000V to ± 100V in less than two seconds (the
discharge time) at a distance of one foot (30 cm) using
the high fan speed. Testing is performed in accordance
with the ionization standard ANSI/ESD STM3.1.
The Benchtop Air Ionizer requires 24VDC power, which
is supplied through a Mini DIN connector on the back
of the unit. The Ionizer is packaged with a switching
power supply, capable of converting 100V–240VAC,
50/60 Hz into 24VDC. The switching power supply uses
a 6 ft. (1.8 m) cord to connect to the ionizer, and has an
IEC 320 input socket for incoming power. It comes with
a North American-style three-prong plug or Continental
Europe (EURO) plug. Two versions are available
depending on the power cord plug (European or North
American). The Ionizer should only be used with the
included power supply.
June 2017
USER GUIDE TB-9007
The 963E Benchtop Air Ionizer and its accessories are
available as the following item numbers:
Item Description
963E Benchtop Air Ionizer, North America
963E-EURO Benchtop Air Ionizer, Europe
963E-X Power Adapter, 100-240VAC Input,
24VDC 1.5A Output, No Power Cord
Installation
The Benchtop Air Ionizer mounts easily in a variety of
positions using the provided tilting bracket/stand. Place
the unit on the work surface and point it at the area or
object to be neutralized. Alternatively, the mounting
bracket may be attached directly to or above the
workstation, or on another supporting structure. Note
that placement of the Ionizer is important in determining
its effectiveness. The distance from the target object,
and fan speed affect the ionizer’s performance. As
distance increases or fan speed is reduced, the
discharge time will increase.
Connect the switching power supply to the Ionizer using
the Mini DIN connector. Then, using the appropriate
electrical power cord, connect the switching power
supply to an electrical outlet.
Operation
The three position rocker switch on the front of the
unit is the POWER switch. The center switch position
(marked O) is the OFF position. The upper and lower
switch positions (marked II and I) turn the unit on to
HIGH and LOW fan speeds. Use this switch to turn the
unit on and to select the desired fan speed. A green
monitor light is also illuminated respectively on the front
of the unit, which indicates that the power switch is in
one of the ON positions, and that the ionizer is now in
use.
Figure 1. SCS 963E Benchtop Air Ionizer