Whirlpool MK6120XAQ Installation Instruction
Download Installation instruction of Whirlpool MK6120XAB Kitchen Appliance Accessories for Free or View it Online on All-Guides.com. This version of Whirlpool MK6120XAB Manual compatible with such list of devices, as: MK6120XAB, MK6120XAQ, MK6120XAZ, MK612OXAY
Brand: Whirlpool
Category: Kitchen Appliance Accessories
Type: Installation instruction
Model: Whirlpool MK6120XAB , Whirlpool MK6120XAQ , Whirlpool MK6120XAZ , Whirlpool MK612OXAY
Pages: 2
1
2
STEP 1
STEP 2
PART UST
CUT-OUT DIMENSIONS
/NSTALfdTION
/h/STRUCT/Of’tf FOR WHIRLPOOL TRIM-KIT MODELS: MK6120XAQ. MK6120XAB. MK6120XAZ. MK612OXAY
FOR USE WITH WHIRLPOOL MICROWAVE OVEN MODELS: MT5120XAQ MT6120X(Q, MT6120XY0. MT6900XW. MT6901XW, KCMSlPPYWH, KCMSIPSYAL. KCMS125YWH, KCMS125YAL. KCMSl25YSB
[ UL L&TED - FOR USE OVER GAS 8 ELECTRIC HEAT SOURCE INCLUDING MODELS: RB260PXY, RB220PXY, KEBltO9Y, KEBS107Y 1
v
Low Profile Screws
6 Req’d
Duct D4
Spring Clips
4
Req’d
STEP 3
1. Disconnect microwave and remove any loose
4
items inside the oven before proceeding with
installation.
2. Detach Exiting Strews(4) from the microwave
cabinet sides at locations as indicated.
3. Install Ducts D4 and DlO by re-attaching Exisling
Strews(4) and using No.10 Screws(Z) as shown.
4. Position Duct D6 over microwave, covering
rear exhaust vent. Loose/y attach Duct
using No.12 Screws(P) as shown.
5. Lift the front of Duct D6 and peel backing off
double sided tape tram the Duct bottom. Press
down firmly on Duct. Tighten No.12 Strews(2)
at the back.
PART NO. 4313745
REAR WEW OF MICROWAVE
- Duct D6
Height = 15 ‘/,’
Length = 26 ‘/*.
Depth = 23 “/,’ (min.)
Microwave Oven
Cutout Opening
LBuilt-In Oven
cutout openhlg
STEP 4
1. Mark center positions (or center-punch)
for the Anti-Tip Bracket as shown.
Dlmenslons:
A = 4 ‘12’
B = 3 ‘Ia’
c = 17 ‘I,’
2. Drill pilot holes as required.
3. Install Anti-Tip Bracket
with Low Profile
Strews(2) as shown.
<---
_---
‘\
‘\
‘\
‘\
‘\
Cutout Floor
Low Profile Screws 7
Anti-Tip Bracket
Page 1