MARTINDALE VI13800 Instruction Manual

Download Instruction manual of MARTINDALE VI13800 Measuring Instruments, Touch Panel for Free or View it Online on All-Guides.com.

MARTINDALE VI13800 Instruction manual - Page 1
1
MARTINDALE VI13800 Instruction manual - Page 2
2
MARTINDALE VI13800 Instruction manual - Page 3
3
MARTINDALE VI13800 Instruction manual - Page 4
4
VI13800 VOLTAGE INDICATOR
Instruction
Manual
VI13800 instructions rev2.indd 2 16/12/2013 09:45:29
ALWAYS READ THESE INSTRUCTIONS BEFORE PROCEEDING
Thank you for buying one of our products. For safety and full
understanding of its benefi ts please read this manual before use.
Technical support is available from 01923 441717 and support@
martindale-electric.co.uk.
CONTENTS
1 Safety Information 1
1.1 Meaning of Symbols and Markings 1
1.2 Precautions 3
2 Introduction 5
2.1 Inspection 5
2.2 Description 5
3 Operation 6
3.1 Description of LED Indicators 6
3.2 Use of Test Prod Shrouds 7
3.3 Operating Duty Ratio 7
3.4 Proving Check 8
3.5 Testing for the Presence of Hazardous Live Voltage 9
3.6 Interference (Phantom) Voltage 9
4 Maintenance 10
4.1 Periodic Testing 10
4.2 Cleaning 10
4.3 Repair and Service 10
4.4 Storage Conditions 10
5 Warranty 11
Specifi cations
VI13800 instructions rev2.indd 3 16/12/2013 09:45:29
1
1 SAFETY INFORMATION
REMEMBER: SAFETY IS NO ACCIDENT
These instructions contain both information and warnings that are
necessary for the safe operation and maintenance of this product. It
is recommended that you read the instructions carefully and ensure
that the contents are fully understood. Failure to understand and
to comply with the warnings and instructions can result in serious
injury, damage or even death.
Particular attention should be paid to the Warnings, Precautions and
Technical Specifi cations.
Please keep these instructions for future reference.
Updated instructions and product information are available at:
www.martindale-electric.co.uk
1.1 Meaning of Symbols and Markings
Caution - risk of danger & refer to instructions
Caution - risk of electric shock
Equipment protected by double or reinforced
insulation (Class II)
Suitable for live working
Both direct and alternating current (AC and DC)
CAT III (Measurement Category III) is applicable to test and
measuring equipment connected to the distribution part of
the building’s low-voltage MAINS installation.
VI13800 instructions rev2.indd 6 16/12/2013 09:45:29
2
CAT IV (Measurement Category IV) is applicable to test and
measuring equipment connected at the source of the
building’s low-voltage MAINS installation.
Equipment complies with relevant EU Directives
End of life disposal of this equipment should be in
accordance with relevant EU Directives
For further information on measurement categories visit
www.martindale-electric.co.uk.
VI13800 instructions rev2.indd 1 16/12/2013 09:45:30