Admiral MXD-10 Use And Care Book

Download Use and care book of Admiral MXD-10 Mixer for Free or View it Online on All-Guides.com.

Brand: Admiral

Category: Mixer

Type: Use and care book for Admiral MXD-10

Pages: 2 (0.28 Mb)

Download Admiral MXD-10 Use and care book

Admiral MXD-10 Use and care book - Page 1
1
Admiral MXD-10 Use and care book - Page 2
2
OPERATING INSTRUCTIONS
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS
Heavy-Duty
Beaters
Power Supply
Cord
Polarized Plug
Eject Button
Ventilation
Easy-to-Hold
Handle
Boost-of-Power Button
Speed Control Lever:
OFF/1/2/3/4/5
LO/HI Speed Switch
This appliance is for HOUSEHOLD USE ONLY. It may be plugged into
any 120-volt AC electrical outlet (ordinary household current). Do not
use any other type of outlet.
BEFORE USING: Before using the mixer for the first time, wash
beaters, dough hooks and spatula attachment in warm, soapy water.
Rinse and dry thoroughly.
Wipe mixer and storage stand with a soft, slightly damp cloth or sponge
to remove any packaging dust. NEVER IMMERSE mixer, cord or plug,
in water or any other liquid. Use only gentle liquid detergents to wash
attachments. Do not use harsh detergents or abrasive cleaners to clean
any part.
HOW TO USE ATTACHMENTS: This 10-Speed Hand Mixer is capable
of blending several ingredients. Place beaters/dough hooks, etc. in
container holding ingredients, and switch on. This versatile mixer can be
used to make cakes, pies, whipped toppings, mashed potatoes and
much more.
HEAVY-DUTY BEATERS: Designed for all-
purpose mixing. Cut through thick or thin
batters with ease.
WIRE BEATERS: Spindly, thin wire beaters
are ideal for whisking sauces or whipping
light, fluffy ingredients.
DOUGH HOOKS: Spiral dough hooks are
designed to mix heavier batter. Hooks may
also be used for gently mixing pastry dough.
SPATULA ATTACHMENT: Designed to keep
the bowl sides clean from spatters and dry
ingredients when mixing. Not recommended
for thick dough, whipping cream or egg
whites.
Storage Stand holds hand mixer and
attachments.
E
J
E
C
T
5 speeds at LO or HI for a total of 10 speeds,
plus boost-of power at any speed.
Grips
Slots
Tabs
Washer Ring
The plastic spatula attachment directs ingredients that cling to the sides
of the bowl into the path of the beaters. It consists of a spatula blade, a
grip with slots and two prongs extending from the handle.
TO ATTACH SPATULA: Attach beaters first. Stand mixer on a smooth,
flat surface with ventilation pointing upward. Use one hand to hold
mixer steady. Place spatula atop beater sticks so that prongs are
pointing downward between the beaters (Fig. 1). Push down on spatula
grip so that prongs extend beyond beaters and slots on grip are parallel
with beaters (Fig. 2). Gently turn spatula so that beater sticks fit into
slots. Prongs on spatula will now be parallel with beater sticks (Fig. 3).
Grasp prongs from underneath with thumb and forefinger, and pinch
them together slightly. Guide notched tabs at end of prongs into slot
between beater holes on mixer and push until they click into place.
Gently tug on the spatula to ensure that it is properly connected.
TO DETACH SPATULA: Grasp prongs from underneath and pinch them
together slightly to release spatula (Fig. 4). Turn spatula so that prongs
point downward, and lift spatula from beater sticks.
TO USE: Insert plug into any standard household outlet. Place beaters
directly into container holding ingredients to be mixed.
With Speed Switch at LO, slide the Speed Control Lever to select low
to medium speeds. With Speed Switch at HI, slide the Speed Control
Lever to select medium to high speeds. Be sure to turn unit OFF before
changing Speed Switch from LO to HI or vice-versa.
Use the chart below to help you determine the proper speed(s)
for mixing.
With Speed With Speed
Control Switch at
Lever at
1-2 LO Best for mixing dry ingredients and
folding in liquid ingredients, egg whites
and whipped cream.
3-4 LO Ideal for creaming, stirring, making
sauces, gravies, puddings and
quick breads.
5 LO All-purpose mixing.
1 HI All-purpose mixing.
2-3 HI Beats and creams butter and sugar for
cake mixes and frostings. Great for
thicker batters.
4-5 HI Best for whipping cream, beating egg
whites or mashing potatoes.
NOTE: BE SURE SPEED SELECTOR LEVER IS IN THE OFF
POSITION BEFORE CHANGING LO/HI SPEED SWITCH FROM
LO TO HI OR VICE-VERSA.
CAUTION: When using dough hooks in dough, use only with Speed
Switch in HI position and Speed Control Lever on settings 3, 4 or 5.
When kneading dough, use only with Speed Switch on HI and Speed
Control Lever at 4 or 5. To avoid overheating, do not operate longer
than 5 minutes.
BOOST-OF-POWER: The Boost-of-Power provides maximum speed
to get through tough mixing tasks at any speed. Depress the boost-of-
power button to obtain maximum mixing speed anytime an extra boost
of power for thick, heavy batters is needed. Release the button and the
mixing returns to the previously selected speed.
CAUTION: Do not use the boost-of-power in excess of two minutes at
a time, as motor may overheat.
REMOVING BEATERS/DOUGH HOOKS: Slide speed control lever
to the “OFF” position. Unplug appliance. Push down on the eject button
to eject beaters/dough hooks.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Refer it to qualified
personnel if servicing is needed.
NEVER IMMERSE MOTOR HOUSING IN WATER.
TO CLEAN: Be sure unit is unplugged. Remove spatula attachment
and/or eject beaters or dough hooks from unit and wash normally.
The attachments are dishwasher safe. Wipe mixer with a damp cloth
or sponge.
TO STORE: Unplug unit; store in its box in a clean, dry place. Never
store it while it is hot or still plugged in. Never wrap cord tightly
around the appliance. Do not put any stress on the cord where it
enters the unit, as it could cause the cord to fray and break.
FIG. 1
FIG. 2
FIG. 3
FIG. 4
ATTACHING BEATERS/DOUGH HOOKS: Be sure appliance is
unplugged. One attachment from each pair of either beaters or dough
hooks has a small metal washer-ring around the top of the stem; the
other does not. The attachment with the washer-ring must be inserted
into the larger of the two holes in the mixer. (Hole is located to the right
if you are viewing the bottom of the mixer.) Align notches on the beater
with the slots inside the hole. Push until attachment clicks to lock into
place. Insert attachment without the washer-ring into the smaller hole,
and push until it clicks to lock in place. Make sure that the attachments
fit snugly into the receptacles. Gently tug on each attachment to ensure
it is secured properly.
SPATULA ATTACHMENT: