• Home
• Brands
• Campbell Hausfeld Manuals
• Campbell Hausfeld HM7500
• Campbell Hausfeld HM7500 Operating Instructions Manual

Campbell Hausfeld HM7500 Operating Instructions Manual

Download Operating instructions manual of Campbell Hausfeld HM7500 Air Compressor for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

Oilless Pancake

Compressors

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

Description

Portable oilless air compressors are for

home and workshop use. Cleaning or

replacement of the inlet filter on all

models and draining moisture from the

air receivers are required maintenance.

Safety Guidelines

This manual contains information that is

very important to know and understand.

This information is provided for SAFETY

and to PREVENT EQUIPMENT PROBLEMS.

To help recognize this information,

observe the following symbols.

Danger indicates

an imminently

hazardous situation which, if not avoided,

WILL result in death or serious injury.

Warning indicates

a potentially

hazardous situation which, if not avoided,

COULD result in death or serious injury.

Caution indicates a

potentially

hazardous situation which, if not avoided,

MAY result in minor or moderate injury.

Notice indicates

important

information, that if not followed, MAY

cause damage to equipment.

Unpacking

When unpacking unit, inspect carefully

for any damage that may have occurred

during transit. Make sure any loose

fittings, bolts, etc., are tightened before

putting unit into service. In case of

questions, damaged or missing parts,

please call 1-800-543-6400 for customer

assistance. Have the serial number,

model number, and parts list (with

missing parts circled) before calling.

Operating Instructions HM7500

Breathable Air Warning

This compressor/pump is not

equipped and should not be

used “as is” to supply breathing

quality air. For any application of

air for human consumption, the

air compressor/pump will need

to be fitted with suitable in-line

safety and alarm equipment. This

additional equipment is necessary

to properly filter and purify the

air to meet minimal specifications

for Grade D breathing as

described in Compressed

Gas Association Commodity

Specification G 7.1 - 1966, OSHA

29 CFR 1910. 134, and/or Canadian

Standards Associations (CSA).

DISCLAIMER OF WARRANTIES

In the event the compressor is

used for the purpose of breathing

air application and proper in-line

safety and alarm equipment is

not simultaneously used, existing

warranties shall be voided, and

Campbell Hausfeld disclaims any

liability whatsoever for any loss,

personal injury or damage.

General Safety

CALIFORNIA PROPOSITION 65

This product or

its power cord may

contain chemicals, including lead, known

to the State of California to cause cancer

and birth defects or other reproductive

harm. Wash hands after handling.

You can

create

dust when you cut, sand, drill

or grind materials such as

wood, paint, metal, concrete,

cement, or other masonry.

This dust often contains chemicals known

to cause cancer, birth defects, or other

reproductive harm. Wear protective gear.

GENERAL SAFETY INFORMATION

IN628600AV 12/08

Air compressors are utilized in a variety

of air system applications. Because air

compressors and other components

(material pump, spray gun, filters,

lubrications, hoses, etc.) used make up

a high pressure pumping system, the

following safety precautions should be

observed at all times. Only persons well

acquainted with these rules of safe

operation should be allowed to use the

air compressor.

All electrical work

should be done

by a qualified (licensed or certified)

electrician. On a properly wired circuit,

the black wires supply a voltage

potential even when the unit is off.

1. Read instruction manuals for

© 2008 Campbell Hausfeld/Scott Fetzer

For parts, product & service information

visit www.chpower.com

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

See Warranty on page 8 for important information about commercial use of this product.

Record the Model No., Serial No. and

date of purchase located on the base

below the pump in the space below.

Model No. ____________________

Serial No. ____________________

Date of purchase _________________

Retain these numbers for future

reference.

STOP!

DO NOT RETURN THE

PRODUCT TO THE

RETAILER!