Campbell Hausfeld PW167612AV Assembly Instructions And Parts List
Download Assembly instructions and parts list of Campbell Hausfeld PW167612AV Pressure Washer for Free or View it Online on All-Guides.com.
Brand: Campbell Hausfeld
Category: Pressure Washer
Type: Assembly instructions and parts list for Campbell Hausfeld PW167612AV
Pages: 12 (4.39 Mb)
Download Campbell Hausfeld PW167612AV Assembly instructions and parts list
1
2
3
4
5
6
7
8
9
10
11
12
Max Pressure with Effective Pressure Maximum Motor Power Maximum Inlet Unit
Model Standard Lance w/Turbo Lance Capacity (Single Phase) Voltage Water Temperature Weight
Electric Pressure
Washer
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
Specifications
PW167612AV 1600 psi 1750 psi 1.6 GPM 14.5 Amps 120 V 100˚F 39 lbs.
Installation Instructions
Assembly Instructions and Parts List PW167612AV
NOTE: REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
Tools Required for Installation:
● Flat Screwdriver
● Hammer/Mallet
● Adjustable Wrench
1. Set plastic spacer (included in parts
pack) on workbench (Figure 1).
2. Place “star shaped” retaining ring on
the spacer (tangs pointing down)
(Figure 2).
3. Tap the retaining ring onto the axle
(Figure 3 & 4).
4. Put both wheels on axle, solid sides
together (Figure 5).
5. Attach opposite ring in the same
manner (Figure 6).
6. Slide wheels out and snap axle into
place on the underside of body
(Figure 7).
7. Snap wheel covers on the wheel.
8. Attach foot to front of pressure wash-
er body (Figure 7).
9. Hook up chemical suction hose to the
tip on the bottom of the handle
(Figure 8).
10. Attach black handle with enclosed
screws and washers (Figure 9).
Figure 1
IN457001AV 2/03
U
L
Approved
Figure 2
Figure 4
Figure 5
Figure 6
Figure 7
Figure 9
Figure 8
Figure 3
Solid
Sides
Instrucciones de montaje y lista de piezas PW167612AV
© 2003 Campbell Hausfeld/Scott Fetzer
For parts, product & service information
visit www.chpower.com
No. de Número de
Ref. Descripción Repuesto Cant.
Para ordenar repuestos, sírvase llamar al 1-800-330-0712
(En los Estados Unidos, o llame a su distribuidor local)
Lista de Repuestos
Sírvase proporcionar la siguiente información
-Número de modelo
-Número de serie (si lo hubiera)
-Descripción y número del repuesto, según se
indica en la lista de repuestos
Dirija su correspondencia sobre
repuestos a:
The Campbell Group / Parts Dept.
100 Production Drive
Harrison, OH 45030 U.S.A.
1 Lanza regulable PM257000SV 1
2 Lanza turbo PM257100SV 1
3 Manguera PM243600AV 1
4 Pistola PM037201AV 1
5 Niple adaptador PM022100AV 1
6 Conector rápido PM020600SV 1
7 Limpiador de puntas PM008500AV 1
8 Tanque de Detergente PM059000SV 1
9 Paquete de piezas (Mango Superior/Ruedas/Pata Delantera) PM062200SV 1
10 Eje PM062400SV 1
11 Ruedas PM059100SV 2
12 Tapa de las ruedas PM059200SV 2
13 Pata Delantera PM059400AV 1
14 Tapa, Tanque de Detergente PM060000SV 1
1
3
5
4
6
7
2
Para ordenar repuestos, sírvase llamar al 1-800-330-0712
(En los Estados Unidos, o llame a su distribuidor local)
8
13
10, 11, y 12
14