Campbell Hausfeld WT6100 Operating Instructions Manual

Download Operating instructions manual of Campbell Hausfeld WT6100 Welding System for Free or View it Online on All-Guides.com.

Brand: Campbell Hausfeld

Category: Welding System

Type: Operating instructions manual for Campbell Hausfeld WT6100

Pages: 24 (0.49 Mb)

Download Campbell Hausfeld WT6100 Operating instructions manual

Campbell Hausfeld WT6100 Operating instructions manual - Page 1
1
Campbell Hausfeld WT6100 Operating instructions manual - Page 2
2
Campbell Hausfeld WT6100 Operating instructions manual - Page 3
3
Campbell Hausfeld WT6100 Operating instructions manual - Page 4
4
Campbell Hausfeld WT6100 Operating instructions manual - Page 5
5
Campbell Hausfeld WT6100 Operating instructions manual - Page 6
6
Campbell Hausfeld WT6100 Operating instructions manual - Page 7
7
Campbell Hausfeld WT6100 Operating instructions manual - Page 8
8
Campbell Hausfeld WT6100 Operating instructions manual - Page 9
9
Campbell Hausfeld WT6100 Operating instructions manual - Page 10
10
Campbell Hausfeld WT6100 Operating instructions manual - Page 11
11
Campbell Hausfeld WT6100 Operating instructions manual - Page 12
12
Campbell Hausfeld WT6100 Operating instructions manual - Page 13
13
Campbell Hausfeld WT6100 Operating instructions manual - Page 14
14
Campbell Hausfeld WT6100 Operating instructions manual - Page 15
15
Campbell Hausfeld WT6100 Operating instructions manual - Page 16
16
Campbell Hausfeld WT6100 Operating instructions manual - Page 17
17
Campbell Hausfeld WT6100 Operating instructions manual - Page 18
18
Campbell Hausfeld WT6100 Operating instructions manual - Page 19
19
Campbell Hausfeld WT6100 Operating instructions manual - Page 20
20
Campbell Hausfeld WT6100 Operating instructions manual - Page 21
21
Campbell Hausfeld WT6100 Operating instructions manual - Page 22
22
Campbell Hausfeld WT6100 Operating instructions manual - Page 23
23
Campbell Hausfeld WT6100 Operating instructions manual - Page 24
24
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
IN971800AV 4/03
Operating Instructions Model WT6100
TIG Torch
BUILT TO LAST
Description
The WT6100 TIG torch allows you to
convert your Arcitech 110 inverter
technology welder to a TIG (GTAW)
welder. TIG stands for Tungsten Inert
Gas. GTAW is Gas Tungsten Arc
Welding. TIG is also commonly call
Heliarc
®
welding, but Heliarc
®
is a brand
name of the Linde Company, not a
process. Heliarc
®
comes from Helium
Arc Welding, as helium is an inert gas
used to keep impurities from the weld.
Today most TIG welding is done with
100% Argon shielding gas.
TIG welding gives the most beautiful
and clean welds with the most
precision and control. It is the best
process for welding dissimilar size items
together. The drawback to TIG welding
is that it takes a high skill level, and it is
slow.
TIG welding is often used in welding
Aluminum, however welding
Aluminum with TIG requires an AC
high frequency power source. The
Campbell Hausfeld Arcitech 110 has DC
only output, so it can not weld
Aluminum with the TIG process.
Unpacking
When unpacking, inspect carefully for
any damage that may have occurred
during transit. Make sure any loose
fittings and screws, etc. are tightened
before putting unit into service.
The electrode
holder is "live"
(has current potential) when machine is
turned on.
Components of the WT6100
TIG Torch:
1. 2% Thoriated Tungsten Electrode -
1/16” (1.6 mm)
2. Nozzle #7 use with 1/16” (1.6 mm)
electrode
3. Collet Body - match to electrode size
(1.6 mm)
4. Collet - matched to electrode size
(1.6 mm)
5. Insulator
6. Torch Head
!
WARNING
7. Gas Valve
8. O-rings (for gas valve and back cap)
9. Back Cup
10. 12.5’ Torch hose
11. Dinse plug power connector
(connect to negative (-) output on
welder)
12. Gas connector (connect to gas
regulator on 100% Argon tank)
For parts, manuals, product & service information
visit www.chpower.com
or call 800-746-5641
Figure 1 - Welder Components and
Controls
© 2003 Campbell Hausfeld/Scott Fetzer
Figure 2
1
2
3
4
5
6
7
8
8
9
10
Figure 3
11
12
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.