Videx 316C Installation Instructions Manual

Download Installation instructions manual of Videx 316C Power distribution unit for Free or View it Online on All-Guides.com.

Brand: Videx

Category: Power distribution unit

Type: Installation instructions manual for Videx 316C

Pages: 8

Download Videx 316C Installation instructions manual

Videx 316C Installation instructions manual - Page 1
1
Videx 316C Installation instructions manual - Page 2
2
Videx 316C Installation instructions manual - Page 3
3
Videx 316C Installation instructions manual - Page 4
4
Videx 316C Installation instructions manual - Page 5
5
Videx 316C Installation instructions manual - Page 6
6
Videx 316C Installation instructions manual - Page 7
7
Videx 316C Installation instructions manual - Page 8
8
66251700-EN - V1.1 - 31/10/16
1
Accessories
Art.316C - Installation instructions
Art.316C VX2200 - RJ-45 A/V distribution box
Fig. 1
66
77
25
CA
B
Fig. 2
DESCRIPTION
Due to the popularity of CAT5 cable for use on video intercom sys-
tem Videx have developed the Art.316C, a 4 way distribution box
with RJ-45 connections for the VX2200 6 wire bus video system.
It distributes the power (+ & –), the bus (L & –) and the video
(V1 & V2) from the main bus to 4 apartment outputs with RJ-45
connector.
The distributor also include an in and an out connection to con-
nect multiple Art.316C devices on the same bus.
The main bus connections include both RJ-45 and terminal con-
nections should a larger cable be required for the main bus en-
abling distanced of up to 400m.
LEGEND
A
Power LED.
When o this indicates there is no voltage between the ter-
minals “+” (plus) and “–” (minus).
Check that the wires are not interrupted or that the +20Vdc
power supply unit is connected to mains.
B
BUS LED.
When o this indicates there is no bus voltage which could
be he result of a short, a broken wire or if there is no master
door panel or concierge connected.
C
Video line termination switch.
End of line termination for the video. This should be set to “C”
(Closed) on the end of line device only.
KEY FEATURES
Allows the installer to use standard CAT5 cable crimped to an RJ-45 plug
1 input / 1 output RJ-45 connection or standard 6 wire screw terminals
4 RJ-45 outputs to connect directly to 6000 Series monitors
1 switch to terminate the impedance of the video signal (End of Line)
2 fault diagnostic LED’s to indicate bus and power.
MATCHING SIGNALS OVER CAT5
EIA/TIA568B
1
2
3
4
5
6
7
8
o
O
g
B
b
O
br
BR
8
7
6
5
4
3
2
1
BR
br
G
b
B
g
O
o
EIA/TIA-568B
RJ-45 pin VX2200 Signal
1 and 2 (white-orange / orange) L
3 and 4 (white-green / blue)
5 and 6 (white-blue / green) +
7 (white-brown) V1
8 (brown) V2
EIA/TIA568A
1
2
3
4
5
6
7
8
g
G
o
B
b
O
br
BR
8
7
6
5
4
3
2
1
BR
br
O
b
B
o
G
g
EIA/TIA-568A
RJ-45 pin VX2200 Signal
1 and 2 (white-green / green) L
3 and 4 (white-orange / blue)
5 and 6 (white-blue / orange) +
7 (white-brown) V1
8 (brown) V2
NOTE: DO NOT USE CROSS OVER CABLES.
IMPORTANT NOTE: SOLID COPPER CABLES MUST BE USED. COPPER COATED STEEL CCS AND COPPER COATED
ALUMINIUM CCA CAN NOT BE USED ON THE SYSTEM.
TECHNICAL SPECIFICATION
Housing/Mounting: ABS plastic box / surface mount
Power Supply: 20V dc
Power consumption: Stand-by: 8mA Max: 40mA
Working Temperature: -10 +50 °C
ENG