VIA Technologies ARTiGO A1250 Quick Manual

Download Manual  of VIA Technologies ARTiGO-A1250 Desktop for Free or View it Online on All-Guides.com.

VIA Technologies ARTiGO-A1250 Manual  - Page 1
1
VIA Technologies ARTiGO-A1250 Manual  - Page 2
2
ARTiGO A1250
Quick Guide
Key Features:
Ultra-slim, space saving, low noise and low
power consumption
Powered by 1.2GHz VIA Eden
®
X4 processor
Support multiple I/O on dual access panel
Quick installation, convenient to setup and
easy maintenance.
Optional Wi-Fi support and VESA mount
The ARTiGO A1250 is an ultra-slim size system powered by a high per-
formance 1.2GHz VIA Eden
®
X4 processor. The ARTiGO A1250 system
is designed to be space saving system with an elegant chassis that fits
easily into any environment and is suitable for a broad spectrum of ap-
plication, including media streaming, home automation, digital signage
and surveillance.
The ARTiGO A1250 has a wide selections of interfaces on the front and
back panel to easily support various applications, easy integration and
quick setup. In addition, the ARTiGO A1250 is a low power consumption
system and fully compatible with Windows and Linux operating systems.
Packing List:
1 x ARTiGO A1250 system
1 x AC-to-DC power adapter
1 x Power cord
1 x SATA cable
1 x Screw park for HDD
1 x DC plug strap holder
A1250
Inspired by Poco-ITX
30
1 2
1
Watchdog Timer:
System reset
Programmable 1 ~255 sec
BIOS:
AMI Aptio UEFI BIOS, 32Mbit Flash memory
Front Panel I/O:
3 x Audio jacks: Line-in, Line-out and Mic-in
2 x USB 2.0 ports
1 x Red LED for HDD activity
1 x Green LED for power status
1 x Power on/off button
Back Panel I/O:
1 x Gigabit Ethernet port
2 x USB 3.0 ports
1 x VGA port
1 x Mini HDMI port
1 x DC-in jack
1 x Antenna hole reserved to support Wi-Fi
1 x DC plug strap holder hole
Power Supply:
12V DC-in (typical: 30W)
Dimensions:
177mm(W) x 30mm(H) x 125mm(D) (6.96” x 1.18” x 4.92”)
Weight:
0.68kg (1.49lbs)
Mounting:
VESA mount
Mechanical Construction:
Aluminum top cover chassis housing
Galvanized steel sheet (SECC) body chassis housing
Front removable aluminum face plate
Operating Temperature:
0°C ~ 40°C
Note:
Please ensure that all items in the packing list are present before using this
product. If any of the items are missing or damaged, contact your distributor
or sales representative immediately.
Layout Diagram
Step 2
Remove the two screws from the memory access cover then gently lift
up the cover. Flip over the memory access cover and remove the
protective plastic cover of the pre-installed memory thermal pad.
Dimensions
Front View
Side View
Step 3
Align the notch on the SODIMM memory module with the protruding
wedge on the SODIMM slot. Gently insert the SODIMM memory
module at a 30 degrees angle. Push down the SODIMM memory until
the locking clips lock the memory module into place. There will be a
slight tension as the SODIMM memory module is being locked.
Step 4
Reinstall the memory access cover and secure it with two screws.
Specifications:
CPU:
1.2GHz VIA Eden
®
X4
Chipset:
VIA VX11H Advanced all-in-one system
System Memory:
1 x SODIMM slot supporting DDR3 1066/1333 MHz
Supports up to 8GB memory size
Graphics:
Integrated VIA C-640 DX11 3D/2D graphics with MPEG-2,
WMV9, VC1 and H.264 video decoding acceleration
Storage:
1 x Hard disk bracket tray for 2.5” SATA HDD
LAN:
VIA VT6130 Gigabit Ethernet controller
Support wake-on LAN and Boot from LAN (PXE)
Audio:
VIA VT2021 High Definition Audio Codec
System Indicator:
Power status LED (green LED)
HDD activity LED (red LED)
Storage Temperature
-10°C ~ 60°C
Operating Humidity:
0% ~ 90% (non-condensing)
Compliance
CE/FCC
Software Compatibility (Operating System):
Windows 10
Windows 8.1
Windows 8
Windows 7
Windows XP
Windows XP Embedded Standard 2009
Windows Embedded Standard 7
Step 1
On the bottom side of ARTiGO A1250, attach carefully each rubber foot
to the designated area then firmly press it down to ensure the rubber
foot is properly in place.
Installing the Rubber
Feet and Memory
Notes:
1. The ambient temperature and the CPU loadings affect the system fan rpm.
Therefore, the higher rpm will generate higher fan noise (dB). The smart fan
of ARTiGO A1250 system runs at lowest speed (default) at 25°C room
temperature and when the CPU loading is less than 60%.
2. As the operating temperature provided in the specifications is a result of the
test performed in VIA’s chamber, a number of variables can influence this
result. Please note that the working temperature may vary depending on the
actual situation and environment. It is highly suggested to execute a solid
testing and take all the variables into consideration when building the
system. Please ensure that the system runs well under the operating
temperature in terms of application.
Inspired by Pico-ITX
A1250
HDD LED
Power LED
Power On/Off
Mic-in
Line-out
Line-in
USB 2.0
Front Panel I/O
Back Panel I/O
HDMI
3.0
+12V
DC-in
USB 3.0
Wi-Fi antenna hole
DC plug strap holder hole
VGA
Mini HDMI
Gigabit Ethernet
Bottom View
A1250
Inspired by Poco-ITX
100mm
100mm