• Home
• Brands
• Canon Manuals
• Canon 1450B002 - PIXMA MP510 All-in-One Photo Printer
• Canon PIXMA MP510 Quick Start

Canon PIXMA MP510 Quick Start

Download Setup instructions of Canon 1450B002 - PIXMA MP510 All-in-One Photo Printer All in One Printer, Digital Camera for Free or View it Online on All-Guides.com.

1

2

Start Here

Easy Setup Instructions

Unpack the Machine

• Please confirm the included items against the illustration printed on the lid of the packing box.

• A USB cable is necessary to connect the machine with your computer.

QT5-0453-V02

a Place the machine on a flat and horizontal

surface, and do not place any objects in front

of the machine. Open the Front Feeder, and

extend the Paper Output Support and the Paper

Support.

Caution

Before turning on the machine, remove all of the shipping

tapes.

Important

Do not connect the USB cable until after the software is in-

stalled.

b Plug the power cord in the back of the machine

and connect the other end to the wall outlet.

Important

• Plug the power cord all the way in, since it may be difficult to

plug.

• Make sure that the Document Cover is closed.

c Open the Operation Panel, then press the ON/

OFF button to turn on the machine.

d Use the { or } button on the Operation Panel to

select the language for the LCD, then press the

OK button.

(1) Press the { or }

button to select the

language.

(2) Press the

OK

button.

1 Prepare the Machine

Important

If an unintended language is displayed on the LCD, proceed

setup to the end of step 3 “Install the Ink Tanks”, and then

refer to “An Unintended Language Is Displayed on the LCD”

in “Troubleshooting” of the User’s Guide on-screen manual to

change the LCD language.

If the message <Install the print head and set the ink tank.>

appears, go to e.

e Lift the Scanning Unit (Printer Cover) open, and

set the Scanning Unit Support to hold the cover.

The Print Head Holder moves to the center.

Scanning Unit (Printer Cover)

f

Write down the serial number located inside

the machine. You will need this to register your

product.

Serial Number Location

3 Install the Ink Tanks2 Install the Print Head

a Remove the Print Head from its package.

Caution

There may be some transparent or light blue ink on the inside

of the bag the print head comes in, or the inside of the protec-

tive cap - this has no effect on print quality. Be careful not to

get ink on yourself when handling these items.

b Remove the orange protective cap from the Print

Head and discard it.

Protective Cap

Electrical Contacts

Print Head Nozzles

Note

Do not touch the print head nozzles and the electrical contacts.

c Firmly raise the Print Head Lock Lever until it

stops.

d Insert the Print Head.

Do not touch!

e Lower the Print Head Lock Lever carefully.

Important

If the Scanning Unit (Printer Cover) is left open for more than

10 minutes, the Print Head Holder moves to the right. Close

and reopen the Scanning Unit (Printer Cover) to return the

Holder to the center.

a Peel back the orange tab completely and remove

the plastic wrapper from the ink tank.

If the orange-colored protective film is not removed

completely, problems with printing may occur.

b Twist off and discard the orange protective cap

located on the bottom of the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

Important

• Do not touch the electrical contacts.

• Do not touch the ink port.

c Insert the ink tank into the right-hand slot and

press the mark on the ink tank until it clicks

into place.

d Make sure the ink lamp lights red.

Refer to the color guide on the

Print Head Lock Lever.

e Lift the Scanning Unit (Printer Cover) slightly to

set the Scanning Unit Support back to its original

position, and then gently close the Scanning Unit

(Printer Cover).

Important

The machine starts operating. Wait about 2 minutes until the

machine stops making noise.

Hardware setup is complete.

Loading Paper

This machine offers two paper sources to load printing

paper; the Auto Sheet Feeder, found at the top of the

machine, and the Front Feeder, found at the front of the

machine.

Note

• At purchase, the machine is set to feed from the Auto Sheet

Feeder.

• You can load A4, Letter, or B5-sized plain paper in the Front

Feeder. When using any other type of paper, load it in the

Auto Sheet Feeder.

Auto Sheet Feeder

Front Feeder

Loading Paper in the Auto Sheet Feeder

a Load the paper in the Auto Sheet Feeder

with the print side facing UP.

b Align the paper stack against the Cover

Guide on the right side of the Paper Support.

c Pinch the Paper Guide and slide it against

the left side of the paper stack.

Paper Guide

Print side facing UP.

Cover Guide

Loading Paper in the Front Feeder

a Load the paper in the Front Feeder with the

print side facing DOWN and the leading

edge to the far side.

b Align the paper stack against the right edge

of the Front Feeder.

c Align the near and the left edges of the

paper with the Paper Size Mark.

d Pinch the Paper Guide and slide it against

the left side of the loaded paper stack.

Paper Guide

Print side facing DOWN.

Paper Size Mark

Note

For details, refer to the Quick Start Guide.

Photo All-in-One