TP-Link AC2600 Quick Installation Manual

Download Quick installation manual of TP-Link AC2600 Wireless Router for Free or View it Online on All-Guides.com.

Brand: TP-Link

Category: Wireless Router

Type: Quick installation manual for TP-Link AC2600

Pages: 2

Download TP-Link AC2600 Quick installation manual

TP-Link AC2600 Quick installation manual - Page 1
1
TP-Link AC2600 Quick installation manual - Page 2
2
Quick Installation Guide
AC2600 Wireless Dual Band Gigabit Router
Connect the Hardware
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 5 and 6 to
complete the hardware connection.
7106506185 REV1.1.0
Verify that the following LEDs are on and solid
before continuing with the configuration.
6
Power
On
On
Internet
2.4G
On
5G
On
Note: If the 2.4G LED and 5G LED are off, please press the Wi-Fi On/Off
button on the side panel for 2 seconds and check the LEDs again a few
seconds later.
Turn on the router.
5
Turn on the modem, and then
wait about 2 minutes for it to
restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Modem
Router
Power adapter
Power adapter
Turn off the modem,
and remove the backup
battery if it has one.
2
3
4
Internet
For optimum performance, orient the four antennas
as shown in the drawing below.
30° 30°
1
Install the antennas.