RCI F2164 Installations
Download Installations of RCI F2164 Locks, Switch for Free or View it Online on All-Guides.com.
1
2
3
4
©2011 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM
USA: 2517 SQUADRON COURT, SUITE 104, VIRGINIA BEACH, VA 23453 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6
PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAIL: SALES@RUTHERFORDCONTROLS.COM
®
INSTALLATIONS
ISF2
®
INSTALLATIONS
F2164
ELECTRIC STRIKE
Standard Parts: Accessories:
Insert Latch Monitor Switch - F2LM
Deadbolt Bracket
Deadbolt Plug
Guardbolt Bracket (Auxiliary Bolt Bracket)
Keeper Shims: 1/16” (1.5mm) & 1/8” (3.0mm)
A Center-lined latch faceplate and an Offset
latch faceplate are provided. Both are:
4-7/8” x 1-1/4” (123.8mm x 31.8mm)
Trim Plate
12VDC or 12 to 24VAC Cable Connector
24VDC Cable Connector
Tamper Proof Strike Mounting Screws (2pcs)
Wiring Instructions
Use the appropriate wire harness supplied.
12V for 12VDC & 12-24VAC
24V for 24VDC only
Attach the red wire to (+) positive of the power supply. Attach
the black wire to the (–) negative of the power supply.
If using AC power, polarity is not observed.
NOTE: If a suppression diode is required for access control,
observe proper polarity.
Latch Monitor Wires
Black = Common (C)
Blue = Normally Close (NC)
Orange = Normally Open (NO)
Red
Black
+
-
+
-
Red
Black
24VDC
Terminal
12VDC
12-24VAC
Terminal
NO
NC
C
Latch
Monitor
Optional LM
Wiring the F2 Series Electric Strike
The fail secure locking mechanism shall only be installed where allowed by the local authority having jurisdiction and shall not
impair the operation of the panic hardware or intended operation of the emergency exit.
Model F2164 must be connected to a compatible UL Listed Burglary or Access Control Power Supply.
PCN110022
R08/11SH