• Home
• Brands
• Canon Manuals
• Canon imageCLASS D760
• Canon imageCLASS D760 Limited Warranty

Canon imageCLASS D760 Limited Warranty

Download Setup instructions of Canon imageCLASS D760 All in One Printer, Fax Machine for Free or View it Online on All-Guides.com. This version of Canon imageCLASS D760 Manual compatible with such list of devices, as: imageCLASS D760, imageCLASS D760 Set-up, imageCLASS D761 Set-up, imageCLASS D780, imageCLASS D780 Set-up

1

2

3

4

5

6

7

8

For installation help and operational

instructions, call:

1-800-828-4040 1-800 OK CANON

U.S.A. CUSTOMERS CANADA CUSTOMERS

Output Tray

L50 S-Cartridge

Label

Connect the supplied power cord to the power

cord connector on the left side of the machine.

REMOVE ALL ITEMS FROM THE BOX

CONNECTING USING PARALLEL CABLE

or CONNECTING USING USB CABLE

CONNECTING THE POWER CORD

• POWER CORD

• TELEPHONE LINE*

• DOCUMENTATION

(Set-up Instructions, Reference Guide, Fax Guide*,

Limited Warranty Card, Registration Card**)

• DESTINATION LABEL*

• CD-ROM

Remove the shipping

attachment on the left

side using a coin.

Otherwise the scanning

unit of the machine is

locked and you cannot

make copies or send faxes.

Grasp the cartridge

with one hand, firmly

and slowly pull out

the sealing tape tab

with the other hand.

Remove the

sealing tape

completely.

Slide left until the

I4 mark appears.

When the power cord is

plugged into both the

machine and into a power

outlet, the machine will

automatically turn on. The

LCD displays PLEASE

WAIT. Please wait until

the LCD returns to the

Copy Mode standby

display.

Connect the supplied power cord to the power cord

connector on the left side of the machine.

Then connect the other end into a properly grounded Standard 120V three-prong outlet.

Copy Mode standby display

Remove the

cartridge from

its bag.

Remove the shipping

material.

REMOVE ALL SHIPPING MATERIALS

UNPACK MACHINE

1

INSTALL CARTRIDGE

2

CONNECTIONS

4

SET-UP INSTRUCTIONS

imageCLASS D700 Series

Place the cartridge

on a flat and stable

surface, grip the

sealing tape tab

and snap in the

direction shown.

Make sure that the

tab is detached from

the cartridge.

Machine

Rock the cartridge

5 or 6 times to

distribute the

toner evenly.

* D780 Model

** U.S.A. only

FA7-5177 (010)

Printed in China

Position the arrow mark

on the cartridge towards

the inside of the

machine, and gently

slide the cartridge into

the machine as far as it

will go.

Close the cartridge cover

and slide the platen unit

back to the original

position.

2

1

1

Lift the platen unit

lever (1) and slide

the platen unit to

the left (2).

Open the

cartridge cover.

A

E

B

A

B

C D

E F

C D

Grip the cassette

handle, and pull it

out towards you

until the cassette

comes to a stop.

Load the paper stack beneath

the cassette’s length guide (1)

and width guide’s claws (2).

Make sure that the paper stack does

not exceed the length and width

guide’s claws in the cassette. Failure

to do so will cause a paper jam.

Gently insert the cassette as

far as it will go.

Hook the tab on

the output tray

onto the opening

on the left side of

the machine.

LOAD PAPER / ATTACH OUTPUT TRAY

3

A

B

C

PAR

USB interface connection

Connect to your computer using USB cable.

Connect to your computer using a USB cable.

USB interface connection.

PARALLEL

Parallel interface connection

Connect to your computer using a parallel cable.

Make sure the computer is turned off.

062002A

Insert the removed

shipping attachment

from STEP A into the

holder.

Keeping the cartridge

cover open, go

to section 2 -

INSTALL CARTRIDGE.

Keep the shipping

attachment in the holder

in case you need to

transport the machine.

F

The actual shape, quantity, and/or location of the

tape and shipping material may differ.

CRT_IMAGECLASSD700_EN 26/09/2003 17:11PM Page 1