• Home
• Brands
• Tascam Manuals
• Tascam US-322
• Tascam US-322 Quick Start Manual

Tascam US-322 Quick Start Manual

Download Quick start manual of Tascam US-322 Kitchen Appliances, Recording Equipment for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

TASCAM US-322/US-366

1

Quick Start Guide

D01194220F

US-322/US-366

USB Audio Interface

Before connecting this unit to a computer, the dedicated driver must be installed on the computer.

Thank you for your purchase of the TASCAM US-322/US-366

USB Audio Interface.

This compact USB audio interface is ideal for use as part of

a digital recording system based around a computer. Using

this interface, you can easily mix sounds from the computer,

gaming devices, guitars, synthesizers and other instruments,

as well as, for example, narration using a microphone, and

you can broadcast this mix live on the Internet. The included

driver software has a mixer screen and various effect screens

with faders, knobs, buttons and other controls that make

operation even more intuitive. This unit can be operated

using only USB power, so you can use it together with a

notebook computer to make an extremely compact audio

mixing and recording system.

This document provides examples of basic operation of this

unit. For details, please download the Owner’s Manual from

the TEAC Global Site (http://teac-global.com/) and refer to it.

IMPORTANT SAFETY PRECAUTIONS

8

For U.S.A

INFORMATION TO THE USER

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or

more of the following measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not expressly

approved by TEAC CORPORATION for compliance could

void the user's authority to operate this equipment.

8

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME

À LA NORME NMB-003 DU CANADA.

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 1834 Gage Road, Montebello,

California, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold

with the apparatus. When a cart is

used, use caution when moving the

cart/apparatus combination to avoid

injury from tip-over.