Tech Lighting 700OCTUR Installation Instructions

Download Installation instructions of Tech Lighting 700OCTUR Outdoor Light for Free or View it Online on All-Guides.com.

Tech Lighting 700OCTUR Installation instructions - Page 1
1
Tech Lighting 700OCTUR Installation instructions - Page 2
2
Tech Lighting 700OCTUR Installation instructions - Page 3
3
Tech Lighting 700OCTUR Installation instructions - Page 4
4
1.0
Installation Instructions for
Turbo Column
1
920OCTURBO
GP I :ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
Refer to the product specsheet for dimming information.
ALLEN
WRENCH
1
BASE PLATE
SET SCREW
1A
Loosen the four set screws on(Do Not Remove)
column base with the provided Allen wrench and
remove the base plate.
1
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
OUTDOOR
Install the Column
2
3
Bring the power wires to the fixture location in
accordance with local electrical codes.
Mount the base plate to an even and smooth surface
using the provided template on page 3.
NOTE: anchor/lag bolts, nuts, and washers not
provided.
1B
2
33
1C
Align the tab on the column top to the slot in the
column base, insert the fixture wires into the column
base, and assemble them together.
Secure them together by installing the Allen bolts and
washers with the provided Allen wrench.
4
COLUMN TOP TAB
COLUMN BOTTOM SLOT
ALLEN BOLT
& WASHERS
ALLEN WRENCH
5
4
1D
ALLEN
WRENCH
SET SCREW
6
Carefully install the column assembly onto the base
plate and secure it in place by tightening all 4 set
screws.
1.5
700OCTUR_
5