Red Lion CSMSTRLE User Manual

Download Operation & user’s manual of red lion CSMSTRLE Controller for Free or View it Online on All-Guides.com.

Brand: red lion

Category: Controller

Type: Operation & user’s manual for red lion CSMSTRLE

Pages: 8

Download red lion CSMSTRLE Operation & user’s manual

red lion CSMSTRLE Operation & user’s manual - Page 1
1
red lion CSMSTRLE Operation & user’s manual - Page 2
2
red lion CSMSTRLE Operation & user’s manual - Page 3
3
red lion CSMSTRLE Operation & user’s manual - Page 4
4
red lion CSMSTRLE Operation & user’s manual - Page 5
5
red lion CSMSTRLE Operation & user’s manual - Page 6
6
red lion CSMSTRLE Operation & user’s manual - Page 7
7
red lion CSMSTRLE Operation & user’s manual - Page 8
8
1
ADDS MULTIPLE PROTOCOL CONVERSION FUNCTIONALITY
TO DATA ACQUISITION AND MULTI-ZONE PID CONTROL
APPLICATIONS
PERFORMS HIERARCHICAL CONTROL OF OTHER MODULES
IN THE MODULAR CONTROLLER SERIES
STORES MODULE CONFIGURATION INFORMATION, AND
AUTOMATICALLY REPROGRAMS REPLACED MODULES
EXTENSIVE BUILT-IN DRIVER LIST ALLOWS EASY DATA
MAPPING TO PLCs, PCs, AND SCADA SYSTEMS
INDEPENDENT SERIAL PORTS PROVIDE VIRTUALLY
UNLIMITED INTEGRATION METHODS
10 BASE-T/100 BASE-TX ETHERNET CONNECTION PROVIDES
NETWORKING CAPABILITY
SUPPORTS UP TO 16 MODULAR CONTROLLER SERIES
MODULES
SUPPORTS UP TO NINE PROTOCOLS
SIMULTANEOUSLY(with expansion card)
GENERAL DESCRIPTION
The Model CSMSTRLE is a communications and control platform designed
for use with Modular Controller Series slave modules. The CSMSTR uses a
proprietary high speed serial protocol to communicate, via backplane connection,
with up to 16 slave modules. Through the same connection, the Master also
provides power to the modules.
When powered up, the CSMSTR automatically identifies and addresses
connected slave modules. By storing the configuration information of all of the
modules, the CSMSTR is able to automatically configure modules if they are
replaced.
The Master provides high-speed RS232/422/485 communication ports and an
Ethernet port for connection to PCs, PLCs, and SCADA systems. An extensive
list of master and slave protocol drivers are available to allow the CSMSTR to
share and exchange variable data with external devices. The 10 Base-T/100
Base-TX Ethernet port can also be used to connect and share data with other
devices at high speeds.
The design of the Modular Controller Series high density packaging and DIN
rail mounting saves time and panel space. The controller snaps easily onto
standard top hat (T) profile DIN rail.
SOFTWARE
The CSMSTR is programmed with Crimson
®
2.0 software for Windows
®
2000 or later platforms. The software is an easy to use, graphical interface which
provides a means of communication configuration, as well as commissioning
and calibration of new systems.
CONTENTS OF PACKAGE
- CS Master
- Termination Plug
- Terminal Block for connecting power.
- Rubber End Cap
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller. An independent
and redundant temperature limit indicator with alarm outputs is strongly
recommended.
CompactFlash is a registered trademark of CompactFlash Association.
MODELS CSMSTRLE – ENHANCED MODULAR CONTROLLER SERIES MASTER
Bulletin No. CSMSTRLE-E
Drawing No. LP0672
Released 09/12
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
CAUTION: Risk of Danger.
Read complete instructions prior to installation
and operation of the unit.
5.30
(134.7)
RS232
ETHERNET
CF
STS
USB/PG
RS485
RS232/PG
3.09 (78.5)
4.15 (105.4)
DIMENSIONS In inches (mm)
C
C
US LISTED
US LISTED
U
L
R
IND. CONT. EQ.
34AD
FOR USE IN HAZARDOUS LOCATIONS:
Class I, Division 2, Groups A, B, C, and D
C
C
US LISTED
US LISTED
U
L
R
3PWL
PROGRAMMABLE
CONTROLLERS
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF
COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C, D, OR NON-HAZARDOUS
LOCATIONS ONLY