Red Lion CUB4i User Manual

Download Operation & user’s manual of red lion CUB4i Measuring Instruments for Free or View it Online on All-Guides.com.

Brand: red lion

Category: Measuring Instruments

Type: Operation & user’s manual

Model: red lion CUB4i , red lion cub4v

Pages: 4

Download red lion CUB4i Operation & user’s manual

red lion CUB4i Operation & user’s manual - Page 1
1
red lion CUB4i Operation & user’s manual - Page 2
2
red lion CUB4i Operation & user’s manual - Page 3
3
red lion CUB4i Operation & user’s manual - Page 4
4
1
LCD, POSITIVE REFLECTIVE OR NEGATIVE TRANSMISSIVE
WITH YELLOW/GREEN OR RED BACKLIGHTING
FOUR SELECTABLE D.C. RANGES
0 to 199.9 mV, 1.999 V, 19.99 V, 199.9 V (CUB4V)
0 to 199.9 µA, 1.999 mA, 19.99 mA, 199.9 mA (CUB4I)
0.6 INCH (15.2 mm) HIGH LCD DIGITS
BUILT-IN SCALING PROVIDED
AUTO ZEROING CIRCUIT
SELECTABLE DECIMAL POINTS
WIRE CONNECTIONS MADE VIA SCREW CLAMP TYPE
TERMINALS
FITS DIN STANDARD CUT-OUT 2.68" (68 mm) x 1.30" (33 mm)
NEMA 4X/IP65 SEALED FRONT PANEL BEZEL
9 TO 28 VDC POWERED
DESCRIPTION
The CUB4 Volt and Current Meters are designed and manufactured using the
latest technology for a high quality, compact, affordable instrument for use in
industrial environments. Each unit has a 3½-digit LCD display with 0.6 inch
(15.2 mm) high digits and a DIP switch selectable decimal point. The displays
are available in positive image reflective (black digits, reflective background) or
negative image transmissive (illuminated digits, dark background) with red or
yellow/green backlighting.
The units are constructed of a lightweight, high impact plastic case with a
clear viewing window. The sealed front panel meets NEMA 4X/IP65
specifications for wash-down and/or dusty environments, when properly
installed. A CUB4V or CUB4I unit can be mounted in the same panel cutout as
the CUBVD and CUBID units.
The optional Micro Line/Sensor Power Supply (MLPS1000) is designed to
attach to the rear of an installed CUB4V or CUB4I to provide the necessary power
for the unit. The optional supply can be powered from a 85-250 VAC source.
ORDERING INFORMATION
MODEL NO. DESCRIPTION PART NUMBERS
CUB4V
DC Voltmeter CUB4V000
DC Voltmeter W/Yel-Grn Backlighting CUB4V010
DC Voltmeter W/Red Backlighting CUB4V020
CUB4I
DC Current Meter CUB4I000
DC Current Meter W/Yel-Grn Backlighting CUB4I010
DC Current Meter W/Red Backlighting CUB4I020
MLPS Micro Line/Sensor Power Supply MLPS1000
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
SPECIFICATIONS
1. DISPLAY: 3½-digit (-1999 to 1999), 0.6" (15.2 mm) high digits. Minus (-)
sign is displayed when voltage or current is negative.
2. DECIMAL POINTS: DIP switch selectable decimal points allow the display
to be read in tenths, hundredths or thousandths.
3. POWER REQUIREMENTS:
Reflective Versions: 9 to 28 VDC at 4 mA max.
Backlight Versions: 9 to 28 VDC @ 35 mA typ., 50 mA max. Above 26
VDC, derate operating temperature to 50°C.
4. INPUT RANGES:
D.C. VOLTAGE D.C. CURRENT
(DIP Switch Selectable) (JMPR. Selectable)
±199.9 mVDC ±199.9 µADC
±1.999 VDC ±1.999 mADC
±19.99 VDC ±19.99 mADC
±199.9 VDC ±199.9 mADC
MODEL CUB4 I - MINIATURE D.C. CURRENT METER &
MODEL CUB4V - MINIATURE D.C. VOLTMETER
2.95 (74.9)
1.54 (39.1)
1.96 (49.8).15 (3.8)
1.29 (32.8)
PANEL CUT-OUT
2.68
+.025
-.000
(68 )
+.8
-.0
1.30
(33 )
+.024
-.000
+.6
-.0
.13 (3.3)
DIMENSIONS In inches (mm)
Note: Recommended minimum clearance (behind the panel) for mounting clip
installation is 2.15" (54.6) H x 3.00" (76.2) W.
UL Recognized Component,
File # E179259
CAUTION: Read complete
instructions prior to installation
and operation of the unit.
CAUTION: Risk of electric shock.
Bulletin No. CUB4V/I-K
Drawing No. LP0256
Released 03/13
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net