• Home
• Brands
• Grandstream Networks Manuals
• Grandstream Networks GXP2130
• Grandstream Networks GXP2130 Quick User Manual

Grandstream Networks GXP2130 Quick User Manual

Download Quick user manual of Grandstream Networks GXP2130 IP Phone, Telephone for Free or View it Online on All-Guides.com.

1

Grandstream

GXP2130/GXP2140/GXP2160

Quick User Guide

Basic Phone Operation

USING THE HEADSET OR SPEAKER

1) Use the Speaker Button to turn

speaker ON/OFF.

2) Use the Headset button to use

the headset once it had been connected.

MAKING A CALL

1) Take Handset/Headset off-hook or press

Speaker button or an available LINE key

(activates speakerphone) .

2) The line will have dial tone and the

corresponding line‟s LED will turn green.

3) If you wish, select another LINE key

(alternative SIP account).

4) Enter the phone number.

5) Press the SEND button or press

the “DIAL” soft key.

REDIAL

1) Take the phone off-hook.

2) Press the SEND button or press

the “REDIAL” soft key.

Note: The phone will redial using the

same SIP account as was used for the last

call.

ANSWERING CALLS

Single Incoming Call:

1) Answer call by taking Handset/Headset

off hook or pressing SPEAKER or by

pressing the corresponding account LINE

button.

Multiple Incoming Calls:

1) When there is a call waiting, users will

hear a Call Waiting tone .

2) The next available line will flash red.

3) Answer the incoming call by pressing its

corresponding LINE button.

4) The current call will be put on hold.

5) Toggle between the calls using the LINE

button.

ENDING A CALL

End a call by pressing the “EndCall” soft key

or hang up the phone.

CALL HOLD/RESUME

1) Hold: Place a call on „hold‟ by pressing

the hold button.

2) Resume: Resume call by pressing the

corresponding blinking LINE.

CALL TRANSFER

Assuming that you are in a call and wish to

transfer the call to another party.

Blind Transfer:

1) Press transfer button.

2) Dial the number and press the send button

to complete transfer of active call.

Attended Transfer:

1) Press an idle line key to make a new call and the

active LINE will be placed on hold automatically.

2) Once the call is established, press transfer

button followed by the LINE button of the held line to

transfer the call.

3) After the call is transferred, phone will display idle

screen.

Auto-Attended Transfer:

1) Set "Auto-Attended Transfer" to "Yes" on Web

GUI.

2) Establish one call first.

3) Press transfer key to bring up a new line,

and the first call will be placed on hold automatically.

4) Dial the number and press SEND button

to make a second call.

5) Press transfer key again to make the transfer.

Note: For Auto-Attended Transfer, after dialing out

the number for the second call, a “Split” soft key will

show. If the second call is not established yet

(ringing), pressing “Split” will hang up the second

call. If the second call is established (answered),

pressing “Split” will resume the second call and keep

the first call on hold.

3-WAY CONFERENCE

Initiate a Conference Call:

Assuming that you are already in a conversation and

wish to bring a third party together in a 3-way

conference.

1) Press conference button to bring

up conference dialing screen.

2) Dial the third party number followed by SEND key.

3) When the call is established to the third

party, press the “ConfCall” soft key to initiate 3

-way conference.

Cancel a Conference Call:

1) Press “Cancel” soft key in conference

dialing screen to resume the two-way

conversation.

Hold The Conference:

1) Press hold button to hold the

conference call with all parties are on

hold;

2) Press “ReConf” soft key to resume

conference call; or select the corresponding

blinking LINE to speak with an individual party.

End The Conference:

The conference will be terminated for all three

parties if the conference initiator hangs up or

presses “EndCall” soft key.

VOICEMAIL MESSAGE

A blinking red MWI (Message Waiting

Indicator) indicates a message is waiting.

1) Press the Message button to retrieve the

message. An IVR will prompt the user

through the process of message retrieval.

2) Press a specific LINE to retrieve messages

for a specific line account.

Note: Each account requires a voicemail

portal number to be configured in the

“voicemail user id” field.

MUTE/DELETE

1) Press the MUTE button to mute/

unmute the microphone.

2) The Mute icon indicates whether the

microphone is muted.

VOLUME ADJUSTMENTS

Use the volume button to

adjust the ring volume when the phone is idle.

Press the volume button during an active call

to adjust the call volume.