Leviton BLACK & WHITE 15A Installation Instructions
Download Installation instructions of Leviton BLACK & WHITE 15A Cables and connectors for Free or View it Online on All-Guides.com.
Brand: Leviton
Category: Cables and connectors
Type: Installation instructions for Leviton BLACK & WHITE 15A
Pages: 2
Download Leviton BLACK & WHITE 15A Installation instructions
1
2
PK-92800-10-02-0B
15A Flush Receptacle
Locking Devices
Installation Instructions
Dispositifs verrouillables
Prise encastrée 15 A
Directives d'installation
Receptáculos Empotrados
con Seguro 15A
Instrucciones de Instalación
LIMITED LIFETIME WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for
the benefit of anyone else that this product at the time of its sale
by Leviton is free of defects in materials and workmanship under
normal and proper use during the lifetime of the product. Leviton’s
only obligation is to correct such defects by repair or replacement,
at its option, if the product is returned prepaid, with proof of
purchase date, and a description of the problem to Leviton
Manufacturing Co., Inc., Att: Quality Assurance Department,
59-25 Little Neck Parkway, Little Neck, New York 11362-
2591. This warranty excludes and there is disclaimed liability
for labor for removal of this product or reinstallation. This warranty
is void if this product is installed improperly or in an improper
environment, overloaded, misused, opened, abused, or altered
in any manner, or is not used under normal operating conditions
or not in accordance with any labels or instructions. There are
no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose. Leviton is
not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use
of, any equipment, lost sales or profits or delay or failure to
perform this warranty obligation. The remedies provided herein
are the exclusive remedies under this warranty, whether based
on contract, tort or otherwise.
For Technical Assistance Call:
1-800-824-3005 (U.S.A. Only)
www.leviton.com
ENGLISH
TO INSTALL
WARNING: TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH APPROPRIATE ELECTRICAL CODES
AND REGULATIONS.
WARNING: IF YOU ARE UNSURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONTACT A QUALIFIED
ELECTRICIAN.
CAUTION: USE THIS DEVICE ONLY WITH COPPER OR COPPER CLAD WIRE. WITH ALUMINUM WIRE USE
ONLY DEVICES MARKED CO/ALR OR CU/AL.
1.
WARNING: TO AVOID FIRE, SHOCK, OR DEATH TURN OFF POWER AT CIRCUIT BREAKER OR FUSE
AND TEST THAT POWER IS OFF BEFORE WIRING!
2. TO SIDE WIRE (see Wiring Chart): Remove insulation approx. 5/8" (1.6 cm). Connect wires as follows: Loop
wires clockwise 3/4 turn around terminal screws. Firmly tighten screws over wire loops.
3. Mount device with long mounting screws. Attach wallplate.
4. Restore power at circuit breaker or fuse. INSTALLATION IS COMPLETE.
NOTE: For flanged intlet and outlet drilling plans, please see Leviton's E-Z Find Catalog at
www.leviton.com
.
NOTE: Refer to NEC tables, article 400 for proper wire type and size for your application and load.
FRANÇAIS
INSTALLATION
AVERTISSEMENT : INSTALLER OU UTILISER CONFORMÉMENT AUX CODES DE L’ÉLECTRICITÉ EN
VIGUEUR.
AVERTISSEMENT : À DÉFAUT DE BIEN COMPRENDRE LES DIRECTIVES SUIVANTES, FAIRE APPEL À UN
ÉLECTRICIEN QUALIFIÉ.
MISE EN GARDE : N’UTILISER CE DISPOSITIF QU’AVEC DU FIL DE CUIVRE; EN PRÉSENCE DE FIL
D’ALUMINIUM, UTILISER SEULEMENT LES DISPOSITIFS PORTANT LA MARQUE CU/AL OU CO/ALR.
1.
AVERTISSEMENT : POUR ÉVITER LES RISQUES D’INCENDIE, DE CHOC ÉLECTRIQUE OU DE
BLESSURE MORTELLE, COUPER LE COURANT AU FUSIBLE OU AU DISJONCTEUR ET S’ASSURER QUE
LE CIRCUIT SOIT BIEN COUPÉ AVANT DE PROCÉDER À L’INSTALLATION.
2. CÂBLAGE LATÉRAL (Tableau de câblage): dénuder les fils sur environ 1.6 cm (0,63 po). Raccorder les fils
en procédant comme suit : enrouler les fils sur les bornes de trois quarts de tour vers la droite. Serrer
fermement les vis sur les fils.
3. Fixer le dispositif au moyen des longues vis d’assemblage. Fixer la plaque murale.
4. Rétablir le courant au fusible ou au disjoncteur. L’INSTALLATION EST TERMINÉE.
REMARQUE : Pour connaître les schémas de perçage des socles mâles et femelles, il suffit de se reporter au
répertoire EZ-Find du site
www.leviton.com.
REMARQUE : Se rapporter aux tableaux du
National Electrical Code
(article 400) pour connaître les
calibres et types de fil appropriés pour l’application et les charges en présence.
ESPAÑOL
PARA INSTALAR
ADVERTENCIA: PARA INSTALARSE Y/O USARSE DE ACUERDO CON LOS CODIGOS ELECTRICOS Y
NORMAS APROPIADOS.
ADVERTENCIA: SI USTED NO ESTÁ SEGURO ACERCA DE ALGUNA DE LAS PARTES DE ESTAS
INSTRUCCIONES, CONSULTE A UN ELECTRICISTA CALIFICADO.
PRECAUCION: USE ESTE PRODUCTO SÓLO CON CABLE DE COBRE O REVESTIDO DE COBRE. PARA
CABLE DE ALUMINIO USE SÓLO PRODUCTOS MARCADOS CON EL SÍMBOLO CO/ALR O CU/AL.
1.
ADVERTENCIA: PARA EVITAR DESCARGA ELECTRICA, FUEGO, O MUERTE; DESCONECTE EL
CORDON O INTERRUMPA EL PASO DE ENERGIA MEDIANTE EL INTERRUPTOR DE CIRCUITO O
FUSIBLE. ¡ASEGURESE DE QUE EL CIRCUITO NO ESTA ENERGIZADO ANTES DE INICIAR LA
INSTALACION!
2. CABLEADO LATERAL (Tabla de Cableado): Pele aprox. 1.6 cm (5/8") del aislante. Conecte los conductores
como sigue: Enrosque los alambres 3/4 de vuelta hacia la derecha alrededor de los tornillos terminales. Apriete
firmemente los tornillos sobre el alambre enroscado.
3. Montar el producto con los tornillos largos provistos. Ponga la placa mural.
4. Restablezca la corriente con el fusible o interruptor de circuito. LA INSTALACIÓN ESTÁ COMPLETA.
NOTA: Para perforaciones de entradas y salidas bridadas, por favor vea EZ-Find en el catálogo en
www.leviton.com
NOTA: Para saber el tipo y tamaño apropiado de cable para su aplicación y carga, vea las Tablas del
NEC, Art. 400.
PK-92800-10-02-0B