Johnson 40-6515 Quick Start Manual

Download Quick start manual of Johnson 40-6515 Laser Level, Measuring Instruments for Free or View it Online on All-Guides.com. This version of Johnson 40-6515 Manual compatible with such list of devices, as: 40-6515, 40-6517, 99-002K, 99-006K, 99-026K

Johnson 40-6515 Quick start manual - Page 1
1
Johnson 40-6515 Quick start manual - Page 2
2
1. Fully charge the NiMH battery or insert 4 fresh AA alkaline
batteries (included) into the laser.
2. Mount the laser on a tripod or other stable mounting surface in
either the horizontal or vertical position.
3. For horizontal use, unlock the pendulum and press
. The laser
will self-level and rotate. If the laser is out of its self-leveling range,
it will stop rotating and beep. NOTE: The laser will NOT operate
in the horizontal position if the pendulum lock is engaged.
To
disengage it, rotate the knob counterclockwise.
4. For vertical operation, keep the pendulum in the locked position
and adjust the manual leveling foot until the level vial indicates
that the laser is level, then power on the laser by pressing .
5. Adjust your rotational speed by pressing
. High speeds are
recommended for use with a laser detector; low speeds improve
visibility when working indoors without a detector.
6. When finished, power o the laser by pressing
and ensure the
pendulum lock is engaged.
Thank you for purchasing this Johnson rotary laser! This laser
features simple operation in both horizontal (self-leveling) and
vertical (manually leveling) planes and is ideal for jobsites such as
residential and small commercial grading and excavation up to 800’
in diameter (up to 11 acres).
This tool features:
Class IIIa laser
1/4” @ 100’ accuracy
800’ range (diameter)
Manual vertical mode
Some models include a laser detector
99-026K includes a
rechargeable NiMH battery
Quick Start Guide: Models 40-6515, 40-6516, 40-6517 & 99-002K/006K/026K
www.johnsonlevel.com/manuals
We want to get you up and running as quickly as possible - but this quick start guide is not a replacement for reading and understanding your
operator’s manual! For complete safety & operating instructions, refer to the operator’s manual included with your rotary laser, or scan the QR code.
GETTING STARTED
USING THE PENDULUM LOCK
INSERTING BATTERIES
The pendulum lock is located on the left side of the laser. Rotate it
clockwise to unlock the pendulum
and counterclockwise to lock the
pendulum.
Model 99-026K includes a NiMH battery pack and charger for
convenience but can also operate on AA batteries.
1. To insert the NiMH battery pack, loosen the battery cover screw
and insert both NiMH battery packs. Next, plug in the battery
connector to the pin terminals located between the batteries. The
pin terminals are keyed to prevent erroneous installation.
2. All other laser models require 4xAA batteries (included). Loosen
the battery cover screw and remove any existing batteries. Install
4xAA batteries according to the polarity indicated on the laser.
3. If you will not use the laser for a long time (three months or
longer) it is recommended to remove the batteries to prevent
drainage and/or corrosion.
LOCK the pendulum for transportation
and vertical operation.
UNLOCK the pendulum for horizontal
operation.
Note that UNLOCKED is also called “ON,
indicating the laser can be powered on in
horizontal operating mode.
VERTICAL OPERATION
To operate the laser in vertical mode:
1. Mount the laser vertically to a tripod or other stable surface
2. Keep the pendulum LOCKED.
This will stabilize the pendulum.
3. Level the laser by turning the
vertical leveling screw (located
below the operation panel) until
the bubble is centered within
the vial.
LEVELING SCREW
VIAL