Neo Car Audio ProLink P2MZV1 Installation Manual & User Manual

Download Installation manual & user manual of Neo Car Audio ProLink P2MZV1 Adapter for Free or View it Online on All-Guides.com.

Neo Car Audio ProLink P2MZV1 Installation manual & user manual - Page 1
1
Neo Car Audio ProLink P2MZV1 Installation manual & user manual - Page 2
2
ProLink kit
contents
Installation
NEO interface for iPod
Installation Guide/User Manual
user manual
See back for more
1 3
456
7 8 9
NEO logo is a trademark of NEO Car Audio, Inc. SiriusConnect, Sirius and XM logos are trademark of SiriusXM. The Made for iPod logo is a trademark of Apple Inc. Apple iPod is not included in the package. For our detailed
terms and conditions please visit our website at www.neocaraudio.com.
NEO-MAZ-091411
for selected Mazda vehicles
P2MZV1
Installation Guide/User manual
DBM12345678
XX X-XXX-XXX
Module serial number
Product part number
Identifying your ProLink kit
ProLink module
iPod docking
cable
Connection Diagram
*Do not connect the iPod dock cable under any circumstance to the SIRIUS module connector!
Improper connection can cause permanent damage to iPod/SIRIUS module.
IR receiver
(optional)
ProLink module
(front)
ProLink module
(back)
Update port
(USB to PC)
iPod dock cable*
iPod/iPhone
(not included)
Vehicle BUS
connector
SIRIUS SAT radio
(not included)
Auxiliary device
(not included)
AUX connector
(optional)
SIRIUS connector*
iPod:
Toggle the auido sources between iPod
and SIRIUS/AUX
iPod: Skip to the next ALBUM
* ARTIST is currently not supported
iPod: Skip to the previous ALBUM
No feature assigned
iPod: No feature assigned
iPod: Next Track
iPod: Previous Track
iPod: Skip to the next PLAYLIST
iPod: Skip to the previous PLAYLIST
SOURCE
3
1
4
6
Optional Remote Kit: Functions for iPod
1. Verify compatibility
5. Route kit to glove box or other accessible location
6. Connect battery & test
7. Complete install by re-installing radio
2. Disconnect battery
3. Remove radio from car
4. Install ProLink cable
Some radios will enter an anti-theft security mode and will lock requiring the radio’
s security code
to be entered to unlock it. This code can be requested from the vehicle’s dealership.
Vehicle bus
connector
Dip switch setting
Use this setting for best user experience. Only
available on SAT capable radios. To enable
usage of the SIRIUS Connect
TM
tuner, SAT
emulation must be used.
ON ON
Use this setting when the SAT emulation is not
available due to the limitation of the radio.
- Radio does not display text in CDC mode
- Connection of SIRIUS Connect tuner is not
available in this mode.
SAT Emulation
CDC Emulation
OFF OFF
-
SAT emulation: Basic operation
Accessing the ProLink as the audio source:
Much like the radio’s AM/FM tuner, satellite radio or CD audio sources, the ProLink is integrated to be
part of the vehicle’s audio system. To access the ProLink source, press the SAT button on the radio.
ProLink source selection:
The ProLink adds additional audio sources including iPod, SIRIUS Satellite Radio* and/or audio input*.
the ProLink as the audio source.
*These sources require additional parts/accessories/service from NEO and/or third parties.
Note: When changing source, radio may temporarily display “UPDATING” when switching between iPod and
SIRIUS Connect sources.
Press remote button 2 to set the time iPod will charge after vehicle ignition is turned OFF.
Press remote button 3 to change ProLink audio gain setting.
Press remote button 4 to enable/disable scrolling text.
Press remote button 5 to set radio line display type.
Press remote button 6 to
Press remote button 1 to apply settings and resume audio playback.
Attention installer! Please read the following!
NEO Car Audio strongly recommends that the unit be installed in an easily accessible place!
DO NOT PLACE IT BEHIND THE RADIO!
Whether the unit is professionally or self installed, put the module where you, the end user can get to it easily
in the future. (Have the installer show you where the NEO interface module is installed.)
-Add possible future upgrades, changing software, adding new features, improving operation;
-Access the AUX input on the module to attach any audio device;
-Access the DIP switches located on the module;
-Remove the unit in case of failure.
MAKE SURE THAT THE MODULE IS IN AN ACCESSIBLE PLACE!
Model Model
1G nano 160 GB classic
iPod 5G 5G nano
2G nano 3G touch
iPod classic iPhone 4
3G nano 4G touch
iPod touch 6G nano
iPhone
iPhone 3G
4G nano
120 GB classic
2G touch
iPhone 3GS
Firmware / OS Version Firmware / OS Version
1.3.1 2.0.4
1.3 1.0.2
1.1.3 iOS 4.3.5
1.1.2 iOS 4.3.5
1.1.3 iOS 4.3.5
iOS 3.1.3 1.0
iOS 3.1.3
iOS 4.2.1
1.0.4
2.0.1
iOS 4.2.1
iOS 4.3.5
for selected Mazda vehicles
ProLink interface settings (within first 5 seconds of accessing ProLink as the audio source):
view ProLink firmware version.