Cardo Systems ScalaRider Q1 Quick Manual

Download Manual  of Cardo Systems scalarider q1 Conference System, Headsets for Free or View it Online on All-Guides.com.

Cardo Systems scalarider q1 Manual  - Page 1
1
Cardo Systems scalarider q1 Manual  - Page 2
2
T
his Quick Guide is not a substitute to the user manual and addresses only
a limited scope of features and functions of your scala rider Q1.
This reference guide may be useful to look up some basic functions and
commands while you are on the road and have no access to the user manual.
This Quick Guide can be printed and folded for easy reference, or it may be
viewed directly on your smartphone.
Intercom
Button
(“IC”)
Music / Mobile
Button (“MM”)
Volume Up
(V+)
Volume Down
(V-)
1
| GENERAL FUNCTIONS
Power ON / OFF
Press
“IC
for 2 seconds
ON: 3 BLUE ashes + Ascending tone
OFF: 3 RED ashes + Descending tone
Volume
Tap
V+
or
V-”
to adjust volume of current
audio source
Mute Tap
V+
and
V-”
simultaneously
Battery level indicator
In Standby, press
V+
for 2 seconds
• Blue LED = Full charge
• Purple LED = Half charge
• Red LED = Almost empty
Enable / Disable VOX
(For Intercom calls only)
In standby, press
“V+”
and
“V-”
simultaneously
for 2 seconds
ENABLED: Blue ash for 2 seconds
DISABLED: Red ash for 2 seconds
A2DP audio / Intercom
priority
Via the Voice Menu or the Cardo Community
Enable/Disable
Click-to-Link® (CTL)
(Enabled by default)
Via the Voice Menu or the Cardo Community
Enable/Disable Spoken
Status Announcements
(Enabled by default)
Via the Voice Menu or the Cardo Community
2
| VOICE MENU
Enter Voice Menu
In standby, press “MM” and IC
simultaneously for 5 seconds. Follow the
audio instructions.
Exit Voice Menu
Press “MM” for 2 seconds
3
| LED
STATUS
None scala rider is OFF
1 BLUE ash every
3 seconds
Standby mode
No active audio sources
2 BLUE ashes every
3 seconds
Active mode – Call in progress / music or
other audio source is ON
1 RED ash every
3 seconds
Standby mode – Battery is low
2 RED ashes every
3 seconds
Active mode – Battery is low
Solid RED Charging
4
| MOBILE PHONE
Answer a call
Tap
MM
or speak any word loudly to
answer by VOX
Reject a call
Remain silent for 15 seconds, or press and
hold
MM
for 2 seconds
End a call Tap
MM
Voice Dial*
(if supported by mobile
phone)
Tap
MM
and
“IC
simultaneously and
follow the prompt from the mobile
Redial* Press
MM
and
“IC
for 2 seconds
Hot Dial* Tap
MM
3 times
Set default phone
When on a phone call, press
V+
for
5 seconds
Toggle default phone In Standby, press
MM
for 5 seconds
*This feature is not available during mobile calls
5
| A2DP MUSIC AND FM RADIO
Turn on A2DP Music In Standby, tap “MM”
Turn on Radio In Standby, double tap “MM”
Pause / Stop Audio Press “MM” for 2 seconds
Next Track / Station With audio ON, tap “MM
Previous Track /Station* With audio ON, double tap “MM”
Music Sharing (via A2DP only)
[SENDER] Start/Stop
sharing your music
During A2DP music playback, press V+” or
V-” for 2 seconds
[RECEIVER] Stop music
sharing
Press V+” or “V-” for 2 seconds
*With some phones you may need to repeat this action
6
| PAIRING BLUETOOTH DEVICES: MOBILE PHONE/
GPS/A2DP MUSIC PLAYER
Bluetooth Channel 1
pairing mode
In Standby, press V+ for 5 seconds
Bluetooth Channel 2
pairing mode
In Standby, press V-” for 5 seconds
communication in motion
®
Q1 / Q1 TeamSet