Digimerge DGRT400 Quick Install Manual

Download Quick install manual of Digimerge DGRT400 Computer Hardware, Server for Free or View it Online on All-Guides.com.

Brand: Digimerge

Category: Computer Hardware , Server

Type: Quick install manual for Digimerge DGRT400

Pages: 2

Download Digimerge DGRT400 Quick install manual

Digimerge DGRT400 Quick install manual - Page 1
1
Digimerge DGRT400 Quick install manual - Page 2
2
Please visit our website:
WWW.DIGIMERGE.COM
for a copy of the complete installation
manual and other support material. This is
also contained on the included CD
-
ROM.
DGRT400 (DVS) Quick Install Guide
System requirements
The following are minimum system requirements for an operator’s
PC sufficient to run Digimerge DVS client software:
Desktop or notebook PC with Intel Pentium™ 90 MHz or
compatible CPU.
Pentium II™ MMX™ 300 or better CPU is
recommended for optimal system performance.
32 MB of system RAM (64MB for
Windows NT).
More memory is recommended for improved
overall system performance.
Microsoft® Windows® 95, Windows® 98,
Windows NT™ 4.0, Windows® 2000,
Windows® XP.
Any Windows-compatible modem (internal or external). 57.6 Kbps modem is recommended.
Display adapter configured for 16-bit or better color mode (32768 or more colors)
at 800x600 or higher resolution.
5 MB of free space on system hard disk are required for standard software installation.
Additional free space is required to store individual still images and image sequences.
Hardware Installation
1. First, you should make the appropriate DIP-switch SW settings on the back panel of unit. All possible operation
modes are tabulated:
SW position
Operation Mode
Internal modem Aux mode
Internal modem (standard) ON OFF
Direct cable connection (COM-port) OFF ON
Custom configuration (external modem) OFF OFF
Auxiliary (reserved) ON ON
2. Provided that you will use device with internal modem configuration, connect the telephone line (RJ11 plug) to the
Line connector on your DVS unit. If the same line is also to be used for as a regular telephone line or to connect a
fax machine, then use the Phone connector on the DVS. In that case, you may need to adjust (increase) the number
of rings after which the DVS will respond to an incoming call in order to avoid conflicts with normal phone and/or
fax usage and the associated inconveniences.
3. Next, connect one or more video cameras to any of the 4 BNC connectors on the back panel of the DVS box. The
DVS is capable of camera auto-detection so you are free to use any of the units video inputs in any order. You may
also safely mix color and black & white cameras, as long as they all conform to the same electrical and video
standard (NTSC or PAL).