Emerson PD5098 Owner's Manual

Download Owner's manual of Emerson PD5098 CD Player for Free or View it Online on All-Guides.com.

Brand: Emerson

Category: CD Player

Type: Owner's manual for Emerson PD5098

Pages: 2

Download Emerson PD5098 Owner's manual

Emerson PD5098 Owner's manual - Page 1
1
Emerson PD5098 Owner's manual - Page 2
2
OWNER'S MANUAL
PD5098
PORTABLE CD PLAYER
with AM/FM RADIO
Visit our web site at www.emersonradio.com
1
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods of time.
13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
14.) This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
15.) Do not overload wall outlet. Use only power source as indicated.
16.) Use replacement parts as specified by the manufacturer.
17.) The product may be mounted to a wall only if recommended by the manufacturer.
18.) Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
WARNING
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrow-
head symbol, within an equi-
lateral triangle is intented to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is in-
tended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompany-
ing the appliance.
Warning: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
2
BEFORE WE BEGIN
Thank you………………
for purchasing this Emerson audio product. The Emerson brand is your assurance
of quality, performance and value, and has been since 1912.
Our engineers have included many useful and convenient features in this product.
Please be sure to read this Owner’s Manual completely to make sure you are
getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards
of workmanship. It was tested by Emerson inspectors and found to be in perfect
working order before it left our factory. However, there is always the chance that
some problem may occur because of rough handling during shipment to the retail
store or to the final consumer.
If, after reading this Manual, you experience any problems with the operation of
this product, please refer to the instructions for obtaining service at the end of this
Manual. Emerson and Emerson retailers are committed to your satisfaction.
Once again, thanks for purchasing this Emerson audio product.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
For future reference, record the serial number in the space provided.
Model No.: PD5098
Serial Number :
IMPORTANT NOTES
3
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Operate controls and switches as
described in the manual.
Before turning on the power, make
certain that the connecting cords,
if any, and power cord are properly
installed.
Store your CDs in a cool area to
avoid damage from heat.
When moving the set, be sure to
first disconnect the AC power
cord.
Avoid installing this unit in places
exposed to direct sunlight or close
to heat radiating appliance such as
electric heaters, on top of other
stereo equipment that radiates too
much heat, places lacking
ventilation or dusty areas, places
subject to constant vibration and/
or humid or moist areas.
Do not attempt to clean this unit
with chemical solvents as this
might damage the finish. Use a
clean dry cloth.
4
PREPARATION FOR USE
UNPACKING AND SET-UP
Carefully remove the unit from the carton and remove all packing material from
the unit.
Remove any labels or stickers which may be on the front or top of the set, but
do not remove any labels from the back or bottom.
Press the CD door OPEN button and remove the dummy CD display card from
the CD compartment.
We suggest that you retain the original carton and packing materials in case it
ever becomes necessary to return your unit for service. This is the only sure
way to protect the unit from damage in transit.
If you do dispose of the carton and packing materials, please do so properly.
Emerson cares about our environment.
IMPORTANT INFORMATION
Playing CD’s at higher volume levels increases the battery drain and shortens
the battery life. Try to use AC power whenever it is available.
You must remove the AC Power Cord from the AC Cord Socket on the back
cabinet in order to operate the unit on batteries.
We recommend using alkaline batteries for the longest possible life.
Change the batteries when the output of the unit becomes weak or the sound
becomes distorted. Always change all six (6) batteries at the same time.
If the unit will be stored and not used for 30 days or more it is recommended to
remove the batteries from the battery compartment to reduce the possibility of
damage from battery leakage or corrosion.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
6
Insert six UM-2 ( size C ) batteries.
Battery door
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-
plug) to the PHONES jack on left side panel.
When headphones are plugged in, the
speaker is automatically disconnected.
TO ADJUST THE VOLUME
1.) Set to desired Function AM or FM. 2.) Tune to a station.
3.) Adjust the sound.
BATTERY OPERATION
Disconnect the AC power cord from the AC
socket of the unit. Battery power is cut
automatically while the cord is
connected.
When the volume decreases, or the sound
distorts, replace all of the batteries with new
ones.
AC OPERATION
Connect the smaller end of the AC power
cord to the AC socket on the back cabinet.
Insert the plug into your 120 volt 60Hz
household AC outlet.
CAUTION
To prevent electrical shock, match wide
blade of plug to wide slot and insert fully.
POWER SUPPLY
LISTENING TO THE RADIO
ADJUSTING THE SOUND
AC Plug
AC Outlet
TUNING
5
1.) AC Socket (At back cabinet)
2.) Speaker
3.) Dial Scale
4.) PHONES Jack
5.) CD Display
6.) CD Door
7.) Battery Compartment
(At back cabinet)
8.) Carrying Handle
9.) VOLUME Control
10.) Function Selector Switch
(POWER OFF/AM/FM/CD)
LOCATION OF CONTROLS AND INDICATORS
11.) Telescopic Antenna
12.) TUNING Control
13.) PLAY/PAUSE
Button
14.) REV. SKIP/SEARCH
Button
15.) FWD. SKIP/SEARCH
Button
16.) REPEAT Button
17.) PROGRAM Button
18.) STOP
Button
19.) CD Door OPEN
Button
FRONT VIEW
TOP VIEW
7
FOR BETTER RECEPTION
Extend the telescopic antenna.
AFTER LISTENING
Set the Function switch to ‘POWER OFF’.
1.) Set Function to CD 2.) Press the CD OPEN button to open the
CD door.
3.) Insert a disc with the label side facing
out. Press down near the center hole to
make sure the disc is firmly seated on
the spindle.
COMPACT DISC PLAYBACK
AM
FM
Rotate the unit for best reception.
5.) Press the PLAY/PAUSE
button. Playback will begin on Track 1.
4.) Close the CD door by pressing on front
edge of the door.
PLAY
PAUSE
PLAY
IMPORTANT! The unit should not be carried around during CD playback. If the unit is
subjected to bumps and shocks during playback the disc may skip or stop.
CD
OPEN